Fanuc A06B-2215-B605
€1,250.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
In FANUC maintenance manual B-83495EN/01, A06B-0117-B855#0049 is assigned to both the J5 and J6 axes of the LR Mate 200iD. For the J5 axis, the parts list specifies key A97L-0118-0402#3X3X6BN and pulley A290-7142-X411. For the J6 axis, the same key is combined with pulley A290-7142-X429. Product-specific logistics data states approximately 19 × 12 × 8 cm and 0.8 kg. Documented identifiers and values: A06B-0117-B855; 0049; J5-; J6; SR0.2/6000; 200; 6000; 200; J5-; J6. The model designation identifies a maximum speed of 6000 min⁻¹. Before installation, the complete number with option suffix #0049, J5 or J6 axis assignment, connector pinout, brake circuit, key and existing pulley must match. Product-specific sources identify the exact version as βiSR0.2/6000 with a straight shaft, key and integrated holding brake. In this application, the motor operates within the belt-driven wrist-axis assembly and connects the electrical servo axis to the corresponding axis gearbox through a key and pulley. The information covers device classification, configuration details, electrical data, interfaces and mechanical attributes where listed. These values help verify installation space, connector position, handling and the supplied replacement part. After mechanical replacement, observe belt tension, brake function, cable routing and FANUC axis-mastering requirements. This industrial component is described by its product identification and listed technical characteristics.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | FANUC βiSR |
| Manufacturer/order/identification number | A06B-0117-B855#0049 |
| Device type | AC servo motor |
| Motor model | βiSR0.2/6000 |
| Maximum speed | 6000 min⁻¹ |
| Shaft type | Straight keyed shaft |
| Holding brake | Integrated |
| Robot assignment | FANUC LR Mate 200iD |
| Axis assignment | The product data lists the documented identification and technical characteristics for this component. Documented identifiers and values: J5-; J6. |
| Mechanical transmission | Belt drive |
| Key | A97L-0118-0402#3X3X6BN |
| J5 pulley | A290-7142-X411 |
| J6 pulley | A290-7142-X429 |
| Connections | Motor power, brake and Pulsecoder |
| Dimensions | 19 × 12 × 8 cm |
| Weight | 0.8 kg |
Related products
Go to shop 
Fanuc A06B-0268-B605#S000
€1,500.00
Fanuc A06B-0268-B605
€1,500.00
Bosch Rexroth MSK030B-0900-NN-M1-UG0-NNNN
€1,000.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Fanuc A06B-0117-B855#0049?
The full manufacturer and type number A06B-0117-B855#0049 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.