Fanuc A06B-6079-H103#EM
€660.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
A width of 90 mm, a height of 380 mm, and a depth of 307 mm define the mechanical configuration of the Fanuc A06B-6085-H102. Its net weight is 6.0 kg. This complete order code identifies the single-axis SVM1-20HV servo amplifier module from the FANUC α series for the 400-V input series. Within this product family, the module belongs to single-axis CNC drive technology. Type A and Type B interfaces are provided for the CNC connection. The main circuit uses sinusoidal PWM control with an IGBT bridge. Its electrical ratings are 3.6 A RMS rated output current and a 20 A Peak rated current limit. The assigned servo motors are α3/3000HV and α6/3000HV. This specific model and motor assignment distinguishes the unit from other power ratings in the A06B-6085 family. The axis count remains limited to one servo axis; model, input series, and current rating jointly define the technical variant. When operated with the α6/3000HV, total heat loss is 32 W. Of this value, 22 W remains as heat inside the control cabinet. The specified operating temperature range is 0 to 55 °C. Storage and transport are specified for −20 to 60 °C. Relative humidity may not exceed 90 % and must be non-condensing. The vibration limit is below 0.5 G. The single-axis design, 400-V input series, two CNC interface types, and stated current values are the central technical identification features. The complete A06B-6085-H102 code together with the SVM1-20HV model remains decisive. The separate specification table lists all documented operating, thermal, environmental, and mechanical data in a compact format.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | FANUC α Servo Amplifier |
| Manufacturer/order/identification number | A06B-6085-H102 |
| Device type | Servo amplifier module |
| Model | SVM1-20HV |
| Number of axes | 1 |
| Input series | 400 V |
| CNC interface | Type A / Type B |
| Main-circuit control | Sinusoidal PWM control with IGBT bridge |
| Rated output current | 3.6 A RMS |
| Rated current limit | 20 A Peak |
| Assigned servo motors | α3/3000HV and α6/3000HV |
| Total heat loss with α6/3000HV | 32 W |
| Residual heat in control cabinet with α6/3000HV | 22 W |
| Operating temperature | 0 to 55 °C |
| Storage and transport temperature | −20 to 60 °C |
| Relative humidity | ≤ 90 %, non-condensing |
| Vibration limit | < 0.5 G |
| Dimensions | 90 × 380 × 307 mm (W × H × D) |
| Weight | 6.0 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which module is identified by Fanuc A06B-6085-H102?
The complete order code identifies the single-axis SVM1-20HV servo amplifier module from the 400-V input series.
Which servo motors are assigned to the SVM1-20HV?
The servo motors assigned to A06B-6085-H102 are α3/3000HV and α6/3000HV.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.