Heidenhain 341240-13
€1,000.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Heidenhain 295459-0H incremental rotary encoder belongs to the ROD-456 series and provides 2,500 lines per revolution. The exact identification number assigns the version to a radially routed 1.00 m cable with free end. Its output consists of two approximately sinusoidal signal sequences at about 11 µASS and one reference signal peak. The light source is supplied with 5 V ±5 %; documented current consumption is 120 mA. Permissible scanning frequency depends on the connected subsequent electronics. Mechanically, the encoder has a synchro flange with 58 mm outside diameter and a 6 mm solid shaft. The flange drawing marks the outside-diameter value as 58. The shaft projects 10 ±1 mm beyond the mounting surface. The enclosure is specified as IP64. Permissible mechanical speed is 12,000 U/min, axial shaft load is 10 N and radial load at the shaft end is 20 N. The documented operating temperature range is 0 °C to +50 °C. External dimensions excluding the connection cable are 73 × 58 × 58 mm; the official technical data gives an approximate weight of 0.4 kg. Rotor inertia is 14.5 gcm². Starting torque at 20 °C is specified as 0.15 Ncm. Permissible relative humidity reaches 98 %, while storage is specified from -30 °C to +80 °C. Identification number, line count and cable direction distinguish the exact version within the series.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Heidenhain |
|---|---|
| Product series | ROD 456 |
| Manufacturer / order / identification number | 295459-0H |
| Product type | Incremental rotary encoder (shafted design) |
| Output signal | 11 µASS, approximately sinusoidal |
| Line count | 2,500 lines per revolution |
| Maximum scanning frequency | dependent on subsequent electronics |
| Supply voltage | 5 V ±5 %, 120 mA |
| Flange | Synchro flange, ∅ 58 mm |
| Shaft | Solid shaft, ∅ 6 mm, length 9.5 mm |
| Housing diameter | ≈ 58 mm |
| Protection rating | IP64 (EN 60529) |
| Operating temperature | 0 °C to +50 °C |
| Cooling method | Natural convection |
| Dimensions | 73 × 58 × 58 mm (L × W × H; excluding connection cable) |
| Weight | approx. 0.4 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Heidenhain 295459-0H?
External dimensions excluding the connection cable are 73 × 58 × 58 mm in length × width × height order; weight is approx. 0.4 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.