Heidenhain 682272-03
€1,000.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Identification number 362176-01 belongs to an incremental Heidenhain ROD 553 rotary encoder in version 3750 2AB14-5H. Exact assignment depends on the complete identification number, series designation and variant code visible on the nameplate. This version is recorded with 3,750 lines per revolution and a sinusoidal 1 VPP output signal. Supply is 5 V DC with a tolerance of ±5 percent. Its mechanical interface combines a 9,525-mm shaft, equivalent to 3/8 inch, with a synchro flange. The fixed connecting cable is 3.75 m long. The shaft entry is rated IP64; mechanically permissible speed is 6,000 U/min and cutoff frequency is at least 160 kHz. ROD-500 documentation assigns the ROD 523, ROD 533 and ROD 553 to the same industrial-standard envelope. The associated dimensional drawing specifies a housing diameter of 50.8 mm, an axial housing length of 22 mm and a shaft projection of 7.62 mm. This gives a nominal rigid envelope of 29.62 × 50.8 × 50.8 mm in length × width × height order, including the shaft end. The flexible cable and its bend radius are excluded. No reliable exact weight is available for this identification number, so product weight is stated conservatively and visibly as an estimate of approx. 0.3 kg.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Heidenhain |
|---|---|
| Product series | ROD 500 series |
| Manufacturer / order / identification number | 362176-01 |
| Output signal | 1 Vpp (sinusoidal) |
| Line count | 3,750 lines/revolution |
| Reference mark | 1 |
| Supply voltage | 5 V DC ±5 % |
| Mechanically permissible speed | max. 6,000 U/min |
| Cutoff frequency (−3 dB) | ≥ 160 kHz |
| Shaft diameter | 3/8 inch (9,525 mm) |
| Mounting | Synchro flange |
| Cable length | 3.75 m |
| Protection rating | IP 64 (EN 60529) |
| Operating temperature | −40 °C to +100 °C (fixed cable, 5 V) |
| Dimensions | 29.62 × 50.8 × 50.8 mm (L × W × H; rigid encoder body including shaft end) |
| Weight | approx. 0.3 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Heidenhain 362176-01?
The rigid encoder body including the shaft end measures 29.62 × 50.8 × 50.8 mm in length × width × height order. Product-specific estimated weight is approx. 0.3 kg.
Which signal version is recorded for Heidenhain 362176-01?
The record lists 3,750 lines per revolution, a sinusoidal 1 VPP output, 5 V DC, a 9,525-mm shaft and a fixed 3.75-m cable.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.