Lenze E82EV751_4C
€740.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Lenze E82EV751K4C belongs to the 8200 vector frequency-inverter range. Its typical motor power is 0.75 kW or 1.0 hp, and its mains connection is configured as 3/PE AC. The permissible mains voltage range is 320 to 440 V AC at 45 to 65 Hz. Rated mains current is 3.3 A without a mains choke and 2.3 A with a mains choke. At the output, the inverter provides a frequency range of 0 to 650 Hz. At a switching frequency of 2, 4 or 8 kHz, the rated output current is 2.4 A. A rated output current of 1.6 A applies at 16 kHz. For 60 seconds, the maximum output current reaches 3.6 A at 2, 4 or 8 kHz. Power loss is 60 W. Motor-control methods include a linear and a quadratic V/f characteristic as well as sensorless vector control. Four freely programmable parameter sets can be switched online. Device functions also include DC injection braking, flying restart, S-shaped ramps and a PID controller. The inputs and outputs are configurable, and faults are stored in a history. Integrated monitoring covers short circuit, earth fault, overvoltage, motor stall, motor phase failure and motor overtemperature during inverter operation. The housing is 60 mm wide, 180 mm high and 140 mm deep. Net weight is 1.2 kg. The complete variant code is E82EV751K4C. The listed data comprise this code, the three-phase mains connection, voltage range, motor power and stated output values. Delivery time is confirmed on request.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product range | 8200 vector |
| Manufacturer/order/identification number | E82EV751K4C |
| Device type | Frequency inverter |
| Typical motor power | 0.75 kW / 1.0 hp |
| Mains connection | 3/PE AC |
| Mains voltage range | 320 to 440 V AC |
| Mains frequency | 45 to 65 Hz |
| Rated mains current without mains choke | 3.3 A |
| Rated mains current with mains choke | 2.3 A |
| Output frequency | 0 to 650 Hz |
| Rated output current at 2/4/8 kHz | 2.4 A |
| Rated output current at 16 kHz | 1.6 A |
| Maximum output current for 60 s at 2/4/8 kHz | 3.6 A |
| Power loss | 60 W |
| Control method | Linear and quadratic V/f characteristic plus sensorless vector control |
| Parameter sets | 4 freely programmable sets, switchable online |
| Braking function | DC injection braking |
| Dimensions | 60 × 180 × 140 mm (W × H × D) |
| Weight | 1.2 kg net |
Related products
Go to shop 
Lenze E82EV551-4C200
Price on request
Lenze E82EV152K4B200
Price on request
Lenze E82EV153K4B201
€920.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What electrical ratings does the Lenze E82EV751K4C have?
The inverter uses a 3/PE AC connection with 320 to 440 V and 45 to 65 Hz. At 2, 4 or 8 kHz, rated output current is 2.4 A.
What are the frequency inverter's dimensions and net weight?
The housing measures 60 × 180 × 140 mm in width, height and depth. Net weight is 1.2 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.