Lenze E84AVSCE7514VX0
€1,510.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Documented identifiers and values: E84AVSCE7514VB0; 8400; 0.75 kW; 400 V; 599 Hz; IP20. The rated-current limits must be matched to the motor, while the controllable output-frequency range is 0 to 599 Hz. The exact product designation remains the primary reference when comparing the component with existing equipment and project documentation. Four programmable digital inputs, one digital output, one analogue input and one analogue output provide process connections. CANopen is available on board, and the listed communication options include EtherCAT, EtherNet/IP, POWERLINK, PROFIBUS and PROFINET. The specification table brings together the technical details used to distinguish the component within its product family. The documented value for Fieldbus communication is CANopen on board; EtherCAT, EtherNet/IP, POWERLINK, PROFIBUS and PROFINET. The available product information assigns the documented characteristics to the exact variant shown on this page. These documented details support a structured comparison with the requirements of the intended industrial application. The variant-specific Lenze table confirms external dimensions of 70 × 215 × 219 mm in width × height × depth order and a mass of 1.9 kg for E84AVxxE7514xBx. This xBx construction is 20 mm deeper than the xXx version of the same power rating. The data refer to the individual 8400 StateLine unit without connection cables, external components or shipping packaging. The mechanical values are therefore tied directly to the manufacturer documentation and separated from installation or accessory dimensions. Reference values: E84AVSCE7514VB0; 8400; 75; IP20.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product series | 8400 StateLine |
| Manufacturer/order/identification number | E84AVSCE7514VB0 |
| Typical motor power | 0.75 kW |
| Mains input voltage | Three-phase 3/PE AC 400/500 V |
| Mains frequency | 50/60 Hz |
| Rated output current at 400 V | 2.4 A |
| Rated output current at 500 V | 1.9 A |
| Output frequency | 0–599 Hz |
| Digital inputs | 4 |
| Digital outputs | 1 |
| Analogue input | 1 |
| Analogue output | 1 |
| Fieldbus communication | CANopen on board; EtherCAT, EtherNet/IP, POWERLINK, PROFIBUS and PROFINET |
| Safety function | STO (Safe Torque Off) |
| Degree of protection | IP20 |
| Brake management | Integrated |
| Cooling | Natural convection |
| Dimensions | 70 × 215 × 219 mm (W × H × D) |
| Weight | 1.9 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the external dimensions of the Lenze E84AVSCE7514VB0?
The unit measures 70 × 215 × 219 mm in width × height × depth order.
How much does the frequency inverter weigh?
The documented device weight is 1.9 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.