Lenze 06I41-RS0B0-Z0B0-ST5S00N-R0SU
€330.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
With a rated power of 1.8 kW, the Lenze MDSKSAG056-33 combines size 056 with winding version 33 within the MDKS range. The unventilated synchronous servo motor delivers a rated torque of 4.2 Nm at 4,000 min⁻¹. Its standstill torque is specified as 4.7 Nm, while maximum torque is 17.2 Nm. The rated electrical data comprise 325 V AC, 200 Hz and a rated current of 3.6 A. A maximum current of 16.0 A defines the upper current rating of this motor version. The letters AG in the complete identifier designate the version with a SinCos absolute encoder. This encoder is a single-turn version with a Hiperface interface and 1.024 periods. For mechanical identification, the AG version in size 056-33 has a length of 330 mm. The associated flange dimensions are specified as 120 × 102 mm, and the shaft diameter is 14 mm. The motor weight without brake is 6.3 kg. These values distinguish the specific design from versions with another encoder, mounting arrangement or winding. The MDSKSAG056-33 is classified as a permanent-magnet synchronous servo motor for controlled servo axes. Its efficiency is 87 percent, and its mechanically permissible maximum speed is 5,500 min⁻¹. Selection therefore requires more than matching power and torque: the complete type identifier, including AG, size 056 and ending 33, must correspond. Encoder version, flange geometry, shaft and length likewise form part of the unambiguous mechanical and electrical identification. This version operates without a forced-cooling fan and therefore remains assigned to the unventilated motor design. The moment of inertia is 1.80 kgcm² and the torque constant is 1.18 Nm/A.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product range | MDKS |
| Manufacturer/order/identification number | MDSKSAG056-33 |
| Device type | Synchronous servo motor |
| Size / winding | 056-33 |
| Encoder version | SinCos absolute encoder, single-turn |
| Encoder interface | Hiperface, 1.024 periods |
| Rated power | 1.8 kW |
| Rated speed | 4,000 min⁻¹ |
| Rated torque | 4.2 Nm |
| Standstill torque | 4.7 Nm |
| Maximum torque | 17.2 Nm |
| Rated voltage | 325 V AC |
| Rated frequency | 200 Hz |
| Rated current | 3.6 A |
| Maximum current | 16.0 A |
| Efficiency | 87 % |
| Dimensions | Flange dimensions 120 × 102 mm; length 330 mm |
| Weight | 6.3 kg (without brake) |
Related products
Go to shop 
Lenze 09D41-RS0B0-B14N-ST5S00N-R0SU
€1,000.00
Lenze 09D41-SKMP1-B14N-ST5S00N-R0SU
€930.00
Lenze 10I40-RS0B0-Z0C0-ST5S00N-R0SU
€400.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which motor data define the Lenze MDSKSAG056-33?
This version is specified with 1.8 kW rated power, 4.2 Nm rated torque, 4,000 min⁻¹ rated speed and 325 V AC.
Which encoder belongs to version AG?
AG designates the SinCos absolute encoder as a single-turn version with Hiperface interface and 1.024 periods.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.