SEW-Eurodrive MAS51A030-503-50
€170.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Within the modular MOVIDYN system, the SEW-Eurodrive MAS51A030-503-00 is a separate axis module in the 30-A class. Its power electronics are supplied through the DC link of an associated power supply module. The complete designation identifies the basic unit without the IPOS version; the corresponding SEW part number is 826 072 9. For the IPOS version in the same current class, the range instead uses the suffix -503-50 and a separate part number. At a 500 V AC mains voltage, the DC link input voltage is 700 V DC. For 480 V AC, the corresponding value is 680 V DC, while the maximum DC link voltage reaches 900 V DC. Output voltage ranges from zero to the respective input voltage. With the heat sink attached, the module provides a rated output current of 30 A AC and a maximum current of 45 A AC. At speeds up to 30 min⁻¹, maximum current applies for no more than 0.3 seconds; above that limit it applies continuously. The output stage draws 7.5 W from the internal 24-V-DC supply of the power supply module. The specified cooling method is self-cooling according to the stated DIN classification. The DC link and protective conductor run through busbars in the module assembly. A separate 24-V bus supplies the control electronics, while the data bus on the underside provides the internal connection between the MOVIDYN modules. Up to six axis modules can be connected to one power supply module in this system. This layout differs from a compact servo controller, which combines power supply and axis-module functions in one enclosure. The MAS51A030-503-00 is 105 mm wide, 380 mm high and 250 mm deep. Its net weight is 5.5 kg.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | SEW-Eurodrive |
|---|---|
| Product range | MOVIDYN |
| Manufacturer/order/identification number | MAS51A030-503-00 |
| Device type | MAS51A axis module |
| Part number | 826 072 9 |
| Version | Basic unit without IPOS |
| DC-link input voltage | 700 V DC at 500 V AC mains voltage |
| Maximum DC-link voltage | 900 V DC |
| DC-link voltage at 480 V AC | 680 V DC |
| Output voltage | 0 to input voltage |
| Rated output current | 30 A AC with attached heat sink |
| Maximum output current | 45 A AC with attached heat sink |
| Cooling method | Self-cooling (KS according to DIN 41751) |
| Internal 24-V power consumption of output stage | 7.5 W |
| Dimensions | 105 × 380 × 250 mm (W × H × D) |
| Weight | 5.5 kg net weight |
Related products
Go to shop 
SEW-Eurodrive MAS51A005-503-00
€990.00
SEW-Eurodrive MKS51A010-503-50
Price on request
Bosch Rexroth DKC1.1-030-3
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What current and voltage class does the MAS51A030-503-00 have?
The axis module has a rated output current of 30 A AC and a maximum current of 45 A AC. At 500 V AC mains voltage, the DC link is 700 V DC.
What are the dimensions and weight of the MOVIDYN axis module?
The enclosure is 105 × 380 × 250 mm in width, height and depth. The documented net weight is 5.5 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.