Siemens 1FK7032-5AF21-1HH3
€1,170.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Frame size 100 and the self-cooled 1FK7 Compact design define the Siemens 1FK7105-5AF71-1EG2 synchronous motor. Its rated speed is 3000 min⁻¹; the variant table also specifies rated power of 8.17 kW, rated torque of 26 Nm and rated current of 18 A. A stall torque of 48 Nm is stated for a winding overtemperature of 100 K. The motor has eight poles and a permanent-magnet rotor. The final characters identify the specific mechanical and feedback configuration. The letter E denotes an EnDat absolute encoder with 2048 pulses per revolution and no DRIVE-CLiQ interface. G denotes a smooth shaft with runout tolerance N and no holding brake. The digit 2 assigns IP65 protection and IP67 at the drive-end flange to this version. The documented mounting design is IM B5; the IM V1 and IM V3 mounting positions also belong to this design group. Cooling is self-cooling without a separately driven fan. For mechanical classification, the dimensional drawing specifies a flange dimension P of 240 mm and a centring dimension N of 180 mm. With an absolute encoder and without a brake, the overall length LB is 312 mm. The shaft has a diameter of 38 mm and a length of 80 mm. Weight without a holding brake is 39 kg, while rotor moment of inertia is 156 × 10⁻⁴ kg·m². The complete Siemens order number therefore distinguishes the basic motor, encoder, shaft design, brake configuration and degree of protection. The technical values apply to the 5AF71 version within the 1FK7105 frame size and are listed separately in the specifications as electrical, mechanical and feedback characteristics.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | 1FK7 Compact |
| Manufacturer/order/identification number | 1FK7105-5AF71-1EG2 |
| Motor type | Permanent-magnet synchronous motor |
| Frame size | 100 |
| Rated speed | 3000 min⁻¹ |
| Rated power | 8.17 kW |
| Rated torque | 26 Nm at ΔT = 100 K |
| Stall torque | 48 Nm at ΔT = 100 K |
| Rated current | 18 A at ΔT = 100 K |
| Number of poles | 8 |
| Encoder system | EnDat absolute encoder, 2048 pulses/revolution, without DRIVE-CLiQ |
| Shaft end | Smooth shaft, runout tolerance N |
| Holding brake | Without |
| Mounting design | IM B5 (IM V1, IM V3) |
| Degree of protection | IP65; drive-end flange IP67 |
| Cooling method | Self-cooling, without separately driven fan |
| Dimensions | Flange dimension P 240 mm; centring dimension N 180 mm; overall length LB 312 mm |
| Weight | 39 kg without holding brake |
Related products
Go to shop 
Siemens 1FK7100-5AF71-1AH0
€3,180.00
Siemens 1FK7100-5AF71-1DH0
€4,610.00
Siemens 1FK7063-5AF71-1AA0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which encoder system does the Siemens 1FK7105-5AF71-1EG2 use?
The variant code E denotes an EnDat absolute encoder with 2048 pulses per revolution and no DRIVE-CLiQ interface.
Does this version have a holding brake?
No. Variant code G denotes the smooth shaft with runout tolerance N and no holding brake.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.