Siemens 1FT6105-8AB71-1AB0
€2,850.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 1FT6132-6AC71-4AE0 is a naturally cooled synchronous servo motor from the SIMOTICS S 1FT6 product series. The complete order number identifies the version with 75 Nm and 2000 rpm. Documented features include mounting arrangements IM B5, IM V1 and IM V3, a Sin/Cos 1 Vpp incremental encoder with 2048 P/rev and a keyed shaft with runout tolerance R. A holding brake is present. Power and signal connectors are directed axially on the drive end. Siemens documents natural cooling or natural convection and IP64 protection. DC-link voltage is specified as 600 V DC. Encoder principle, connector direction, shaft version, brake, protection and mounting arrangement are bound to suffix 4AE0. These features are part of the documented 1FT6132-6AC71-4AE0 configuration. The official Siemens dimension sheet for 1FT613x specifies a 473 mm installation length and an 82 mm shaft extension for the 1FT6132 frame with holding brake. The motor envelope reaches 300 mm in width and approximately 350 mm in height including the lifting eyes. The complete device format is 555 × 300 × 350 mm. Connected cables and bending radii are not included in the device dimensions. The official table documents a weight of 95 kg with holding brake. This value describes the motor without shipping packaging. Complete order number, torque, speed, encoder, connector direction, shaft, brake, protection, installation length, shaft extension and external motor envelope form the technical dataset for this version.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S / 1FT6 |
| Manufacturer/order/identification number | 1FT6132-6AC71-4AE0 |
| Equipment type | Synchronous servomotor |
| Rated torque | 75 Nm |
| Rated speed | 2000 rpm |
| Cooling concept | Natural cooling |
| Mounting design | IM B5 (IM V1, IM V3) |
| Encoder | Sin/Cos 1 Vpp incremental encoder, 2048 P/rev |
| Connector orientation | Axial on the drive end |
| Shaft version | With key, concentricity tolerance R |
| Holding brake | Present |
| Protection rating | IP64 |
| DC-link voltage | 600 V DC |
| Cooling method | Natural convection |
| Dimensions | 555 × 300 × 350 mm (L × W × H; motor envelope incl. 82-mm shaft, holding brake and lifting eyes; installation length 473 mm) |
| Weight | 95 kg |
Related products
Go to shop 
Siemens 1FT6086-1AF71-1AG1
€680.00
Siemens 1FT6082-8AF71-3AG1
€2,930.00
Siemens 1FT6044-4AK71-4AB6
€1,500.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 1FT6132-6AC71-4AE0?
For 1FT6132, the motor envelope including the 82 mm shaft extension and lifting eyes is 555 × 300 × 350 mm with a 473 mm installation length. Documented weight with holding brake is 95 kg.
Which encoder and brake version are documented?
The documented version has a Sin/Cos 1 Vpp incremental encoder with 2048 P/rev, a keyed shaft with runout tolerance R and a holding brake.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.