Siemens 6AV6646-1AA22-0AX0
€670.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6AU1432-2AA00-0AA0 identifies the drive-based SIMOTION CX32-2 Controller Extension. The slim module extends the drive-side computing power of a SIMOTION D4x5-2 and is not a P 320 industrial PC. Siemens documents alternative control of up to six servo axes, six vector axes or twelve axes in V/f mode. Drive control is based on the SINAMICS-S120-CU320-2 platform with firmware V4.x or V5.x. Four DRIVE-CLiQ interfaces provide communication. The module also has six digital inputs and four configurable digital inputs/outputs. Rated supply is 24 V DC, with a permissible range of 20.4 to 28.8 V DC. Typical current consumption is 300 mA without loading the inputs and outputs, and typical power loss is 7 W. The documented operating temperature range is 0 to 55 °C. Relative humidity during operation is specified as 5 to 95 percent without condensation; the air-pressure range is 620 to 1.060 hPa. Siemens specifies IP20 or UL open type protection. Complete device dimensions are 25 mm width, 380 mm height and 270 mm depth. Removing the spacer reduces depth to 230 mm. Net weight is 2,600 g. Order number, CX32-2 designation, axis capacity, communication equipment, I/O scope, supply, protection rating, dimensions and weight distinguish the exact Controller Extension from older or visually similar SIMOTION components. These technical data replace the PC, processor, memory, hard-drive and operating-system values previously stored for the product. The complete Siemens order number remains the primary identification feature.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTION CX32-2 |
| Manufacturer/order/identification number | 6AU1432-2AA00-0AA0 |
| Device type | Drive-based Controller Extension |
| Function | Extension of the drive-side computing power of a SIMOTION D4x5-2 |
| Servo axes | max. 6 |
| Vector axes | max. 6 |
| V/f axes | max. 12 |
| Supply voltage | 24 V DC; permissible 20.4 to 28.8 V |
| DRIVE-CLiQ interfaces | 4 |
| Digital inputs/outputs | 6 DI and 4 DI/DO |
| Protection rating | IP20 / UL open type |
| Dimensions | 25 × 380 × 270 mm (W × H × D) |
| Weight | 2,600 g |
Related products
Go to shop 
Siemens 6AG1518-4FP00-4AB0
€14,280.00
Siemens 6AV7675-4RE00-0AA0
Price on request
Siemens 6ES7461-3AA01-0AA0
€310.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of the Siemens CX32-2?
Siemens specifies 25 × 380 × 270 mm in width × height × depth order; depth is 230 mm without the spacer.
Which interfaces does the Controller Extension provide?
Four DRIVE-CLiQ interfaces, six digital inputs and four configurable digital inputs/outputs are documented.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.