Siemens 6ES7 315-2EH14-0AB0
€790.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The rated supply is 24 V DC, with a permissible range from 20.4 to 28.8 V DC. Documented values: V3.2; 24 V; 8 MB. Siemens documents 512 KB of integrated, non-expandable work memory and firmware V3.2. Siemens 6ES7 315-2FJ14-0AB0 is a fail-safe SIMATIC S7-300 CPU 315F-2 PN/DP for safety-related machine and plant control. Siemens specifies an approximate device weight of 340 g and has listed the product in phase-out since 01.10.2023. Siemens specifies 750 mA rated current consumption, typically 150 mA at no load, 4 A inrush current and typically 4.65 W power loss. Engineering uses STEP 7 V5.5 or higher and Distributed Safety V5.4 SP4. A Micro Memory Card is required as load memory and can hold up to 8 MB. The first interface supports MPI and PROFIBUS DP at up to 12 Mbit/s. For replacement, the complete order number, firmware version, Safety signature, communication parameters, MMC content and installed hardware configuration must match. PROFIsafe, PROFINET IRT and isochronous operation over PROFIBUS DP or PROFINET support deterministic and safety-related automation tasks. A standard CPU or neighboring F-CPU is not interchangeable merely because the connectors look similar. The technical record identifies 6ES7315-2FJ14-0AB0 as the exact unit.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC S7-300 / CPU 315F-2 PN/DP |
| Manufacturer/order/identification number | 6ES7 315-2FJ14-0AB0 |
| Device type | fail-safe central processing unit |
| Work memory | 512 KB integrated |
| Firmware | V3.2 |
| Interface 1 | MPI/PROFIBUS DP up to 12 Mbit/s |
| Interface 2 | Ethernet PROFINET with 2-Port-Switch |
| Safety protocol | PROFIsafe |
| Real-time communication | PROFINET IRT |
| Supply voltage | 24 V DC; permissible 20.4 V to 28.8 V |
| Rated current consumption | 750 mA |
| No-load current consumption | typically 150 mA |
| Inrush current | typically 4 A |
| Power loss | typically 4.65 W |
| Load memory | Micro Memory Card up to 8 MB |
| Engineering | STEP 7 V5.5 or higher; Distributed Safety V5.4 SP4 |
| Dimensions | 40 × 125 × 130 mm (W × H × D) |
| Weight | approx. 340 g |
Related products
Go to shop 
Siemens 6ES7317-6FF04-0AB0
€2,090.00
Siemens 6ES7 314-6BH04-0AB0
€3,070.00
Siemens 6ES7341-1AH02-0AE0
€160.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 6ES7 315-2FJ14-0AB0?
The CPU 315F-2 PN/DP measures 40 × 125 × 130 mm in width × height × depth order and weighs approximately 340 g according to the current Siemens data sheet.
Which interfaces are available?
The documented interfaces are MPI/PROFIBUS DP up to 12 Mbit/s and Ethernet PROFINET with an integrated 2-port switch.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.