Siemens 6SE7016-0TP50
€2,510.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Siemens 6SE7032-1TG60 is an air-cooled inverter chassis unit from the SIMOVERT MASTERDRIVES VC series. It uses Vector Control and is the Base Drive version without a -Z suffix. Siemens documents a 510–650 V DC link, 210 A rated current and a 110 kW type rating. The chassis version has IP00 protection and belongs in a correspondingly protected cabinet environment. Table 13-4 of the Siemens operating instructions assigns the exact order number to frame size G. It specifies external dimensions of 508 × 1450 × 450 mm and an approximate weight of 155 kg. These manufacturer values replace the previously stored, differing internal weight estimate. The complete order number is decisive for technical assignment in an existing installation because voltage range, current class, type rating, cooling method and frame size vary within the product family. The documented values describe the individual base unit, not shipping packaging, a pallet or additional cabinet components. Width, height and depth must be considered together for mechanical assignment; the family name alone is insufficient. The basic version without a -Z suffix also remains separate from configured variants with additional options. The installation position includes connections and the existing cooling-air route beyond the unit volume, but these clearances are not part of the specified external dimensions. The unit weight is identified as an approximate Siemens value and is therefore visibly marked as approx. The electrical ratings and mechanical manufacturer data provide a consistent basis for spare-part assignment, transport planning and preparation of the cabinet position. The identity is limited exclusively to Siemens 6SE7032-1TG60.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOVERT MASTERDRIVES VC |
| Manufacturer/order/identification number | 6SE7032-1TG60 |
| Device type | Inverter chassis unit |
| Control method | Vector Control |
| DC-link voltage | 510–650 V DC |
| Rated current | 210 A |
| Type rating | 110 kW |
| Design | Chassis / built-in unit |
| Degree of protection | IP00 |
| Installation environment | Control cabinet |
| Product role | Base Drive |
| Version | Without -Z suffix |
| Cooling method | Air cooling |
| Dimensions | 508 × 1450 × 450 mm (W × H × D) |
| Weight | ca. 155 kg |
Related products
Go to shop 
Siemens 6SE7021-0EA51
€1,840.00
Siemens 6SE7021-0EA51-Z
Price on request
Siemens 6SE7021-0TA61-Z
€1,410.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of the Siemens 6SE7032-1TG60?
Siemens documents external dimensions of 508 × 1450 × 450 mm and an approximate weight of 155 kg.
What are the electrical ratings of the Siemens 6SE7032-1TG60?
The documented ratings are a 510–650 V DC link, 210 A rated current, 110 kW type rating and IP00 protection.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.