Siemens 6SN1118-0DH21-0AA0
€1,550.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
As an analogue control insert for one feed axis, the Siemens 6SN1118-0AD11-0AA0 belongs to the SIMODRIVE 611-A drive family. The plug-in closed-loop control board provides the control function within a modular 611-A assembly. Its distinguishing features are the single-axis design, analogue control and Standard-Interface. The full identifier ends in 0AA0 and differentiates this exact revision from adjacent 6SN1118 control boards. This defines the card position in the 611 system. The specified motor series is Siemens 1FT5. The range of associated single-axis power modules includes rated-current stages of 8 A, 15 A, 25 A, 50 A, 80 A, 160 A and 200 A. Their current-controller assignments are graded as 4/8 A, 7.5/15 A, 12.5/25 A, 25/50 A, 40/80 A, 80/160 A and 100/200 A. This staged combination reflects the modular design: the control insert and power module remain separate assemblies, while the present order number identifies the single-axis Standard-Interface version. The current stage is therefore determined by the separately installed SIMODRIVE power module within the modular system, not by the control board alone. This unit is neither the two-axis 0AE11 variant nor the single-axis 0AA11 comfort-interface version. The board format measures 50 × 130 × 320 mm; the stated product weight is 0.36 kg. The decisive comparison details are the complete order number 6SN1118-0AD11-0AA0, axis count, control method, interface version, motor series and power-module stage. Identifier elements AD11 and 0AA0 remain part of the identity and must not be omitted when comparing visually similar inserts.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMODRIVE 611-A |
| Manufacturer/order/identification number | 6SN1118-0AD11-0AA0 |
| Device type | Closed-loop control insert |
| Control method | analogue |
| Number of axes | 1 axis |
| Drive function | Feed drive |
| Motor series | 1FT5 |
| Interface version | Standard-Interface |
| Design | plug-in control board |
| Power-module rated-current stages | 8 A, 15 A, 25 A, 50 A, 80 A, 160 A and 200 A |
| Current-controller assignments | 4/8 A; 7.5/15 A; 12.5/25 A; 25/50 A; 40/80 A; 80/160 A; 100/200 A |
| Dimensions | 50 × 130 × 320 mm |
| Weight | 0.36 kg |
Related products
Go to shop 
Siemens 6SN1118-0DH23-0AA0
€2,090.00
Siemens 6SN1118-0DJ21-0AA2
Price on request
Siemens 6SN1123-1AA00-0HA1
€1,220.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which version is identified by Siemens 6SN1118-0AD11-0AA0?
The identifier designates an analogue, single-axis SIMODRIVE-611-A control insert for feed drives with a 1FT5 motor and Standard-Interface.
What are the mechanical data of the control insert?
The board measures 50 × 130 × 320 mm and has a stated weight of 0.36 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.