Siemens 6SN1118-1NH01-0AA1
€1,020.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Siemens 6SN1118-0NH11-0AA1 is supplied through the SIMODRIVE-611 power module into which the control board is inserted. Its dimensions are 51 × 305 × 152 mm and its weight is 0.55 kg. As a two-axis HRS version from the SIMODRIVE 611 universal E range, the module processes Sin/Cos encoder signals with 1 Vpp. A memory module holds the speed-setpoint data. The complete order number identifies the E version from software version 9.1. Together with SINUMERIK 802D, the board performs the role of a PROFIBUS-DP slave. Communication can be synchronized with the cycle of the DP master. The documented engineering software is SimoCom U from version 8.3 and covers commissioning, parameterization and diagnostics. An RS232 serial interface is also available. HRS hardware offers higher computing performance than earlier versions and supports an interpolation factor of 2.048. Pulse doubling and pulse division are also provided at the WSG. Mechanically, the connection and installation surface follows the SIMODRIVE-611 design. The complete order number, E version, software version, number of axes, encoder system and required communication option are the individual comparison criteria. The parameter file, firmware version and memory-module configuration are also relevant. The slot in the power module, the installed option board and the wiring define the specific system configuration.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMODRIVE 611 universal E |
| Manufacturer/order/identification number | 6SN1118-0NH11-0AA1 |
| Device type | Control board |
| Control hardware | HRS |
| Controlled axes | 2 |
| Encoder system | Sin/Cos 1 Vpp |
| Setpoint function | Memory module for speed setpoint |
| System connection | SINUMERIK 802D via PROFIBUS-DP |
| PROFIBUS communication | DP slave with isochronous coupling |
| Serial interface | RS232 |
| Parameterization and diagnostics | SimoCom U from version 8.3 |
| Software version of this design | From version 9.1 |
| Interpolation factor | 2.048 |
| Design | Plug-in board for SIMODRIVE-611 power modules |
| Dimensions | 51 × 305 × 152 mm (W × H × D) |
| Weight | 0.55 kg |
Related products
Go to shop 
Siemens 6AU1435-0AA00-0AA1
€1,080.00
Siemens 6SN1118-0DK23-0AA1
€750.00
Siemens 1FK2204-5AF10-0SA0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which control and encoder version does the Siemens 6SN1118-0NH11-0AA1 have?
The module is a two-axis HRS control board from the SIMODRIVE 611 universal E range for Sin/Cos encoders with 1 Vpp. The documented version applies from software version 9.1.
Which engineering and communication features are documented?
SimoCom U from version 8.3 is provided for parameterization and diagnostics. Together with SINUMERIK 802D, the board can operate as an isochronously coupled PROFIBUS-DP slave.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.