ABB AO930B
€580.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
For the range from 0 to 100 percent, ABB also states an output voltage of 0 to 10 V and a maximum load of 434 Ohm. The process side works with 24 V; 5 V and 24 V are documented on the bus side. The typical power dissipation is specified as a maximum of 27 W. With four fault outputs activated, the current consumption of the process supply ranges from a minimum of 20 mA to a maximum of 620 mA. Channel count and signal range distinguish related modules within the product family. The documented signal range extends from −20 to +20 mA with a resolution of 12 bits. The ABB 81AA02D-E with the order number GJR2385200R1010 is an analog output module from the PROCONTROL-P family. The clear assignment to 81AA02D-E and GJR2385200R1010 supports controlled replacement procurement for existing PROCONTROL-P systems. In addition to the exact type number, the number of channels, signal range, resolution, electrical isolation and station bus connection are particularly important for maintenance personnel.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | ABB |
|---|---|
| Product series | PROCONTROL P / 81AA02 |
| Manufacturer/order/identification number | 81AA02D-E |
| Device type | Analog output module |
| Output channels | 4 functional units for four simultaneous analog signals |
| Output signal range | −20 to +20 mA |
| Resolution | 12 bit |
| Output current | 0 to ±20 mA; maximum 30 mA |
| Output voltage range | 0 to 10 V for 0 to 100 % |
| Maximum output load | 434 Ohm |
| Electrical isolation | Outputs isolated from each other and from the system |
| Output protection | Short-circuit proof and open-circuit proof |
| Bus supply | +5 V and +24 V |
| Process supply | +24 V |
| Current consumption | 1.25 A at 5 V; 0.24 A at 24 V bus supply; 20 to 620 mA process side |
| Power dissipation | typically no more than 27 W |
| Interface | PROCONTROL station bus |
| Binary fault outputs | One output per functional unit, output current 100 mA |
| Dimensions | 6 U × 2 divisions × 160 mm (H × W × D) |
| Weight | approx. 0.8 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How many analog outputs does the ABB 81AA02D-E have?
The module has four functional units and can output four different analog signals at the same time.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.