ABB AI930B
€670.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Dimensions of 104 mm in width, 20 mm in height and 104 mm in depth, together with a net weight of 0.13 kg, match the compact S900 format. Documented identifiers and values: AO930N; S900-I/O; AO4H; 0/4; 20-; G3; 104; 20; 104 mm; 0.13 kg. Further technical characteristics include short-circuit and wire-break detection, galvanic isolation between output and bus and between output and power, a common output reference, and the G3 coating specified by ABB. AO930N is suitable when an installed remote I/O station requires four HART-capable 0/4...20-mA outputs in a type N version and the existing PROFIBUS DP system architecture must remain in service. The module provides 4 analogue output channels for 0/4...20-mA signals and must not be confused with digital output modules or analogue input modules. When an S900 station supplies analogue control signals to valves, controllers or other actuators, replacement requires the correct channel, signal and HART version. The common output reference and HART transmission are useful distinguishing features when older bills of materials identify only the S900 module group. At system level, S900 communicates via PROFIBUS DP. Hot Swap, Hot Configuration in Run, redundant power and communication, and FDT/DTM diagnostics are important for operating systems because maintenance and replacement depend on the service concept as well as the part number.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | ABB |
|---|---|
| Product series | S900 I/O |
| Manufacturer/Order/Identification number | 3KDE175533L9300 |
| Equipment type | Analogue output module |
| ABB module designation | AO930N Analog Output HART (AO4H) |
| System version | S900 I/O type N, safe non-hazardous area |
| Communication | PROFIBUS DP at system level |
| Channel type | AO |
| Output channels | 4 |
| Output signal | 0/4...20 mA for actuators |
| HART function | HART frames over the fieldbus, cyclic HART variables |
| Diagnostics | advanced diagnostics, short-circuit and wire-break detection |
| Maintenance functions | Hot Configuration in Run and Hot Swap |
| Coating | G3 coating for all components |
| Dimensions | 104 x 20 x 104 mm |
| Cooling method | passive I/O module assembly |
| Weight | 0.13 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for ABB AO930N?
The full manufacturer and type number AO930N is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.