Bosch Rexroth MDD065B-N-040-N2M-095GA1
€1,250.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Bosch Rexroth MDD065B-N-040-N2L-095GB0 identifies a digital AC synchronous servo motor from the Indramat MDD range. Motor size is 065, motor length B and winding code 040. Rated speed is 4000 min⁻¹. At standstill the motor supplies 1.5 Nm continuous torque at 3.5 A continuous current. Theoretical maximum torque is 4.4 Nm and peak current is 15.9 A. Rotor inertia is 2.2 × 10⁻⁴ kgm². Further electrical values are a 0.43 Nm/A torque constant, 5.22 Ohm winding resistance and 7.4 mH winding inductance. Code N2L denotes standard balancing, digital servo feedback and no second shaft end. Section 095GB0 specifies 95 mm centering, a plain shaft with shaft seal, power connection on side B and no holding brake. The enclosure has IP65 protection and insulation class F. Cooling uses natural convection. Maximum external width is 100 mm. The connectors produce an overall height of 140 mm. The axial envelope of shaft, flange, motor body and rear end is 208 mm. Complete external dimensions are therefore 140 × 100 × 208 mm in height × width × depth order, including the shaft. Motor weight without holding brake is 3.9 kg. The mechanical envelope includes the connector housing and rear end. Separate mating plugs, cables and attached coupling parts are not part of the complete device dimensions. Dimensions and weight refer to the individual motor without optional surface cooling. Type number, feedback, centering, shaft, connection side, brake version, dimensions and weight identify this variant.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Bosch Rexroth |
|---|---|
| Product series | Indramat MDD |
| Manufacturer/Order/Identification number | MDD065B-N-040-N2L-095GB0 |
| Device type | Digital AC synchronous servo motor |
| Motor size and length code | 065 / B |
| Housing design | Standard, for natural convection and surface cooling |
| Rated speed | 4000 min⁻¹ |
| Continuous torque at standstill | 1.5 Nm |
| Continuous current at standstill | 3.5 A |
| Theoretical maximum torque | 4.4 Nm |
| Peak current | 15.9 A |
| Rotor moment of inertia | 2.2 × 10⁻⁴ kgm² |
| Torque constant at 20 °C | 0.43 Nm/A |
| Winding resistance at 20 °C | 5.22 Ohm |
| Winding inductance | 7.4 mH |
| Feedback | Digital servo feedback |
| Shaft and centering | Plain shaft with shaft seal / 95 mm |
| Connection, brake and protection | Power connector side B; without holding brake; IP65, class F |
| Dimensions | 140 × 100 × 208 mm (H × W × D, including shaft) |
| Weight | 3.9 kg |
Related products
Go to shop 
Bosch Rexroth MSK070C-0450-NN-S1-UG1-NNNN
€1,250.00
Siemens 1FK6063-6AF71-1EB0
€1,490.00
Siemens 1FT6044-1AF71-4EA1
€2,090.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Bosch Rexroth MDD065B-N-040-N2L-095GB0?
Complete external dimensions are 140 × 100 × 208 mm including the shaft.
How much does Bosch Rexroth MDD065B-N-040-N2L-095GB0 weigh?
Motor weight without holding brake is 3.9 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.