Control Techniques SP3401
€1,470.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The brushless AC servo motor 95UMB300CACAA belongs to the Control Techniques Unimotor UM series. Its position-based code identifies size 95, stator length B and 3000 min⁻¹ rated speed. This version has no brake, uses standard inertia and carries a 4096 C/T incremental encoder. The output shaft has a feather key. Three-phase VPWM drives with 380–480 Vrms are documented for operation. Continuous stall torque is 4.3 Nm and rated torque at 3000 min⁻¹ is 3.9 Nm. Nominal peak torque is 12.9 Nm. Stall current is 2.7 A and rated power is 1.23 kW. Standard rotor inertia is 2.5 kgcm². The manufacturer drawing specifies a 95 mm flange width and a maximum overall height of 146 mm for size 95. Overall length for unbraked stator length B is 252 mm. Complete external dimensions are therefore 95 × 146 × 252 mm. The stated motor weight for the exact order code is 5.16 kg. The enclosure has cooling fins; protection is IP65S with the motor mounted and the matching connector and cable fitted. Manufacturer, product series and identification number are Control Techniques, Unimotor UM and 95UMB300CACAA. Electrical, mechanical and feedback characteristics therefore belong to the documented 95/B/3000 variant.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Control Techniques |
|---|---|
| Product series | Unimotor UM |
| Manufacturer/order/identification number | 95UMB300CACAA |
| Motor type | Brushless AC servo motor |
| Size | 95 mm |
| Stator length | b |
| Rated speed | 3000 min⁻¹ (Code 30) |
| Drive voltage | 3-phase VPWM drives, 380–480 Veff |
| Continuous stall torque | 4.3 Nm |
| Nominal torque at 3000 min⁻¹ | 3.9 Nm |
| Nominal peak torque | 12.9 Nm |
| standstill current | 2.7 A |
| Rated power | 1.23 kW |
| Feedback | Incremental encoder 4096 C/T (Code C) |
| brake | Not available (Code 0) |
| Rotor inertia | Standard, 2.5 kgcm² (Code A) |
| output shaft | With feather key (Code A) |
| Protection class | The product data lists the documented identification and technical characteristics for this component. Documented identifiers and values: IP65S. |
| Dimensions | 95 × 146 × 252 mm (W × H × D) |
| Weight | 5.16 kg |
Related products
Go to shop 
Siemens 6SL3120-2TE21-0AD0
€400.00
Control Techniques UNI1403
Price on request
Control Techniques UNI1404
€1,340.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Control Techniques 95UMB300CACAA?
Complete external dimensions are 95 × 146 × 252 mm in width × height × depth order. Weight is 5.16 kg.
What are the torque ratings of Control Techniques 95UMB300CACAA?
Continuous stall torque is 4.3 Nm, rated torque is 3.9 Nm and nominal peak torque is 12.9 Nm.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.