Control Techniques M753-024
€2,350.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The permitted line frequency is 48–65 Hz and the input power factor is 0.97. For control-cabinet applications, the documented IP20 enclosure rating, forced convection, and operating range from 0 to 40 °C are decisive. A 2-wire RS485 interface is available for serial communication; the protocol options include Modbus RTU. Maximum permitted non-condensing humidity is 95 % at 40 °C. The exact type assignment distinguishes SP0405 from the adjacent SP0401 to SP0404 types, which have lower current and power ratings despite sharing the same frame size. Open-loop operation supports output frequencies from 0 to 3000 Hz. The type number belongs to size 0 and the 380–480 Vac voltage class with three-phase input and three-phase output. In the official rating table, Control Techniques specifies a maximum continuous current of 4.2 A and a peak current of 7.3 A for SP0405. Typical motor power is 1.5 kW or 2 HP. These values describe the documented SP0405 configuration and distinguish it from other Unidrive-SP power classes. The narrow housing has a front operating surface, lateral cooling areas, and a rear mounting contour. Power, motor, and control connections remain within the enclosure outline. The external dimensions cover the complete width, height, and depth of the basic drive. Weight was converted from the published pound value into kilograms and is therefore marked as approximate. These metric values provide a consistent basis for transport, storage, and spatial product records.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Control Techniques |
|---|---|
| Product series | Unidrive SP |
| Manufacturer/order/identification number | SP0405 |
| Device type | Servo drive / AC drive controller |
| Frame size | 0 |
| Line voltage | 380–480 Vac ±10 % |
| Phase configuration | 3-phase input and 3-phase output |
| Maximum continuous current | 4.2 A |
| Maximum peak current | 7.3 A |
| Typical motor power | 1.5 kW / 2 HP |
| Line frequency | 48–65 Hz |
| Input power factor | 0.97 |
| Cooling method | Forced convection |
| Maximum humidity | 95 % non-condensing at 40 °C |
| Enclosure rating | IP20 / NEMA 1 |
| Output frequency in open-loop operation | 0–3000 Hz |
| Serial communication | 2-wire RS485 with Modbus RTU |
| Option modules | up to 2 SM option modules |
| Dimensions | 62 × 226 × 249.7 mm (W × H × D) |
| Weight | approx. 2.09 kg |
Related products
Go to shop 
SEW-Eurodrive MC07B0110-5A3-4-00
€660.00
Lenze E82EV152K2C000
Price on request
Lenze EVS9323-ES
€1,110.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What is the power rating of Control Techniques SP0405?
For SP0405, Control Techniques specifies a typical motor power of 1.5 kW or 2 HP and a maximum continuous current of 4.2 A.
Which line voltage is SP0405 designed for?
The version belongs to the three-phase 380–480 Vac ±10 % voltage class with a permitted line frequency of 48–65 Hz.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.