Danfoss VLT6011HT4C20STR3DLF00A00C0
Price on request
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
As a PROFIBUS node, the Danfoss 130B1100 exchanges process and parameter data between the drive control and the higher-level master. The order number identifies the standard version of the VLT PROFIBUS DP MCA 101. It operates with PROFIBUS DP-V1 and provides both cyclic communication and acyclic parameter access. A GSD file is used to configure the process data. The PROFIdrive profile and the Danfoss FC profile are available for control. Acyclic communication supports class 1 and class 2 masters. This distinguishes PLC data traffic from parameter software access within the protocol. The option is mounted in the front section of the drive; the illustrated assembly has an elongated front carrier with accessible bus connections. Each node receives a unique station address in the range from 0 to 125. It can be set using the address switches or parameter 9-18. An address already set by the switches appears in the parameter as a read-only value. For an order with shipping from Germany to the United States and other international destinations, 130B1100 is the authoritative identifier for this PROFIBUS option. Switchable bus termination is located on the option card. Terminals 66 and 67 provide a 5 V DC supply for external termination. When a D-Sub adapter has its own termination, the card termination remains switched off to avoid double termination. Two bicolor LEDs distinguish communication status: NS indicates cyclic network traffic, while MS indicates acyclic module traffic. Flashing patterns indicate, among other things, the baud rate search and waiting for parameter or configuration data; steady green on NS indicates active data exchange.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Danfoss |
|---|---|
| Product series | VLT PROFIBUS DP MCA 101 |
| Manufacturer / order / identification number | 130B1100 |
| Device type | PROFIBUS fieldbus option |
| Protocol | PROFIBUS DP-V1 |
| Communication profiles | PROFIdrive or Danfoss FC profile |
| Communication modes | Cyclic and acyclic communication |
| Process data configuration | Via GSD file |
| Station address range | 0–125 |
| Address setting | Switches or parameter 9-18 |
| Bus termination | Switchable via termination switch |
| External termination supply | 5 V DC at terminals 66 and 67 |
| Diagnostic indicators | Two bicolor LEDs for network and module status |
| Master classes | Class 1 and class 2 |
| Dimensions | Approx. 90 × 300 × 60 mm |
| Weight | Approx. 0.5 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How is the PROFIBUS address set?
Using the address switches or parameter 9-18. The station address range is 0 to 125; an address set by the switches is only displayed in the parameter.
What do the two status LEDs indicate?
NS indicates cyclic network status, while MS indicates acyclic DP-V1 communication with class 1 and class 2 masters.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.