ABB AI930B
€670.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
At an operating voltage of 24 V, the ABB 81AB03B-E outputs sixteen binary control signals. Each output carries a current of up to 100 mA. The card belongs to the Procontrol-P14 system and bears ABB order number GJR2392500R1210. Electronic inputs, relays and lamps are the intended load types for this output module. A shared reference conductor forms part of the output circuit. The signals reach the module as telegrams via the station bus. In the processing section, the serially transmitted data is converted into parallel output signals. Programmed addresses assign the signals to the individual outputs. Parity bits check telegram transmission. A timeout monitor detects missing cyclic telegrams; the affected outputs are then set to zero and a fault is reported. Connector X11 carries the station bus and operating voltages, while X21 groups the process connections. Both connectors conform to DIN 41612, type F; their pin counts differ. For the specific order involving shipping to the United States and other international destinations, the 81AB03B-E version is identified as the binary output module by its complete ABB order number. The narrow front belongs to the plug-in card, which has a net weight of 0.55 kg. In addition to normal signal output, the module supports the simulation of individual output signals. A common lamp test for all outputs can be triggered via the TL bus input. The ST LED indicates both module faults and data communication faults. SG is assigned to internal module faults. Diagnostic messages are also transmitted over the bus to the reporting system. Processing the complete module takes 10 ms. The respective output currents are added to the base current consumption of 50 mA. Optocouplers isolate the station bus from the process side within the card.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | ABB |
|---|---|
| Product series | Procontrol P14 |
| Manufacturer / order / identification number | 81AB03B-E |
| ABB order number | GJR2392500R1210 |
| Device type | Binary output module |
| Output channels | 16 |
| Operating voltage | 24 V |
| Output current per channel | Maximum 100 mA |
| Current consumption | 50 mA plus output currents |
| Processing time | 10 ms for the complete module |
| Bus interface | Procontrol station bus |
| Station bus connector | X11, 48-pin |
| Process connector | X21, 32-pin |
| Connector type | DIN 41612, type F |
| Electrical isolation | Optocouplers between bus and process sides |
| Diagnostic indicators | ST: fault; SG: module fault |
| Output simulation | Individually for the binary output signals |
| Dimensions | 20 × 261 × 198 mm (W × H × D) |
| Weight | 0.55 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
How many output signals does the ABB 81AB03B-E provide?
The module has 16 binary output channels. Each output provides up to 100 mA at 24 V.
What are the functions of connectors X11 and X21?
X11 carries the station bus and operating voltages. X21 groups the process connections of the module.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.