Fanuc A06B-0128-B076
€430.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The FANUC A06B-0128-B175#7000 has a stall torque of 6.0 Nm and corresponds to motor model α6/3000 within the α series. It is an AC servo motor with a rated power of 1.4 kW and a rated speed of 3000 min⁻¹. Variant block B175 specifies a tapered shaft, a holding brake rated at 8 Nm and an αA64 pulse coder. The continuous stall current is 10.0 A RMS. Additional characteristics include a torque constant of 0.60 Nm/A RMS and a back-EMF constant of 21 V RMS per 1000 min⁻¹. The specified rotor inertia is 0.0026 kg·m², while the armature resistance per phase is 0.18 Ω. These values describe the basic electrical and mechanical design of the α6/3000. The mechanical time constant is 0.004 s and the thermal time constant is 50 minutes. Static friction torque is specified as 0.3 Nm. The brake, shaft form and feedback are not general series features; they belong to the complete identifier A06B-0128-B175#7000. For shipping from Germany to the United States and other international destinations, the full motor identifier remains clearly assigned to the specific order. The pulse coder provides the feedback version specified by the identifier. The square motor enclosure is 130 mm wide and 130 mm high. The overall length of the braked α6 motor is 309 mm; the associated drawing dimensions B and C are 225 mm and 45 mm respectively. The two 130-mm values describe the square cross-section; 309 mm is the axial overall length of the braked version. Net weight is 13.0 kg. The offered unit has a pulley attachment fitted outside the documented motor outline. The structured dimensions of 130 × 130 × 309 mm therefore refer to the motor without this attachment.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | FANUC |
|---|---|
| Product series | FANUC AC Servo Motor α series |
| Manufacturer/order/identification number | A06B-0128-B175#7000 |
| Device type | AC servo motor |
| Motor model | α6/3000 |
| Rated power | 1.4 kW |
| Rated speed | 3000 min⁻¹ |
| Stall torque | 6.0 Nm |
| Rotor inertia | 0.0026 kg·m² |
| Continuous stall current | 10.0 A RMS |
| Torque constant | 0.60 Nm/A RMS |
| Back-EMF constant | 21 V RMS per 1000 min⁻¹ |
| Armature resistance per phase | 0.18 Ω |
| Mechanical time constant | 0.004 s |
| Thermal time constant | 50 min |
| Static friction | 0.3 Nm |
| Shaft design | Tapered shaft |
| Holding brake and pulse coder | 8 Nm; αA64 |
| Dimensions | 130 × 130 × 309 mm (W × H × D, motor without fitted pulley attachment) |
| Weight | 13.0 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which motor, shaft and brake version does A06B-0128-B175#7000 identify?
The identifier denotes motor model α6/3000 with a tapered shaft and a holding brake rated at 8 Nm.
Which speed and pulse coder belong to this version?
The rated speed is 3000 min⁻¹. The final digits 75 identify the αA64 pulse coder.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.