AC Servo Motor α series

Fanuc A06B-0123-B675

Price on request

Availability is checked individually.

Product condition:
Used, removed from an installation

The item comes from dismantled equipment. We have not carried out an electrical inspection or a comprehensive operational check. Signs of age, use, installation or removal may be present. 14-day right of return in the event of a defect. See Terms and Conditions

  • The estimated delivery time will be confirmed for the specific order.
  • Urgent? Faster options such as direct or express shipping are often possible. Please state your required date when you request a quote or order.

Do you have any questions?

Personal service

We are happy to help with processing, shipping or individual quotations. Simply contact us:

Online and available Currently unavailable

International delivery

The individual quotation states the shipping method and costs for the item and destination.

Product description

Within the FANUC α range, A06B-0123-B675 has a stall torque of 3.0 Nm and a continuous RMS current of 4.6 A. The α3/3000 motor version has a rated speed of 3,000 min⁻¹. Torque generation is characterised by a torque constant of 0.65 Nm/A and a single-phase back-EMF constant of 23 V per 1,000 min⁻¹. Rotor inertia is 0.0014 kgm², with a mechanical time constant of 0.006 s and a thermal time constant of 45 minutes.

The single-phase armature resistance is 0.57 Ω and static friction torque is 0.3 Nm. Mounting uses the square front flange. Variant code B675 defines the mechanical and feedback configuration: digit 6 identifies the straight keyed shaft with integrated holding brake, while digits 75 identify the αA64 absolute pulse coder. This coder provides 65.536 divisions per revolution. The holding brake has 8 Nm braking torque and is supplied with 90 V DC at a permissible deviation of ±10 percent.

Current is no more than 0.4 A; response times are 70 ms for release and 30 ms for braking. The fully enclosed, naturally cooled motor housing corresponds to IC410 and IP65. The square flange measures 130 × 130 mm and the braked α3 version has an overall length of 253 mm. A motor mass of 8.0 kg plus about 2.3 kg for the brake gives an overall weight of approximately 10.3 kg.

Specifications

Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.

Identification

Manufacturer FANUC
Product range FANUC AC Servo Motor α series
Manufacturer/order/identification number A06B-0123-B675
Device type AC servo motor
Motor model α3/3000

Performance data

Rated speed 3,000 min⁻¹
Stall torque 3.0 Nm
Continuous stall current 4.6 A (RMS value)
Torque constant 0.65 Nm/A (RMS value)

Installation and environment

Protection and cooling IP65; IC410, enclosed and naturally cooled

Dimensions and weight

Dimensions 253 × 130 × 130 mm (L × W × H)
Weight approx. 10.3 kg including holding brake

Further details

Back-EMF constant 23 V (RMS value) per 1,000 min⁻¹
Rotor inertia 0.0014 kgm²
Mechanical time constant 0.006 s
Thermal time constant 45 min
Shaft straight keyed shaft
Holding brake 8 Nm; 90 V DC ±10 %; no more than 0.4 A
Brake response times 70 ms release; 30 ms braking
Pulse coder αA64, absolute, 65,536 divisions/revolution
Industrial production environment

Urgent requirement?

Shipping options

Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.

Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.

Contact us now!

Product safety

Manufacturer / EU responsible person

FAQ

Questions about A06B-0123-B675

Contact us
Which shaft and brake version does FANUC A06B-0123-B675 have?

Digit 6 identifies a straight keyed shaft with an integrated holding brake. The brake is rated at 8 Nm, 90 V DC ±10 percent and no more than 0.4 A.

Which speed and coder belong to A06B-0123-B675?

The α3/3000 motor model has a rated speed of 3,000 min⁻¹. Ending digits 75 identify the αA64 absolute pulse coder with 65.536 divisions per revolution.

Ordering and service

What applies if an item develops a defect within 14 days?

For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.

In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.

Which shipping methods and delivery times are available?

The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.

A delivery date is binding only if we expressly confirm it as binding.

Which payment terms apply?

The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.

International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.

Can I return an item ordered incorrectly or found incompatible?

No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.

Can I request individual pricing for several items?

You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.

Do you also purchase industrial spare parts?

Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.

After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.

Receive a quotation by email

Request availability

Use the form to request item-specific price, availability and estimated delivery information.