Lenze E84AVBDE5512SX0
€500.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Order number Fanuc A06B-6057-H001 identifies a single-axis AC Servo Unit. The version belongs to the 185-V input class and AC servo motor model 5-0. PWM controller board A20B-1001-0430 is assigned to this version, while the power controller carries identifier A20B-1001-0410. The TCMD signal represents the current command value for phases R, S and T. Amplifier current limit for motor model 5-0 is 2 A Peak. At that limit, the TCMD output signal reaches 4.44 V. Current conversion is 0.45 A Peak per volt. Factor 0.71 is given for an RMS approximation. These current values are peak values rather than continuous rated output current. The rectangular enclosure is 22 cm long, 15 cm wide and 14 cm high. Complete external dimensions are therefore 220 × 150 × 140 mm in length × width × height order. Device weight is 2 kg. Order number, axis count, input class, motor model, both board identifiers and TCMD values jointly describe the H001 version. The compact enclosure contains controller and power boards within the same external contour. Dimensions and weight refer to the individual AC Servo Unit without shipping packaging. The specification table ends with the complete dimensional entry followed by Weight.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product series | FANUC A06B-6057 AC Servo Unit |
| Manufacturer / order / identification number | A06B-6057-H001 |
| Device type | AC servo amplifier |
| Servo outputs | 1 axis |
| Input version | 185 V |
| PWM controller board | A20B-1001-0430 |
| Power controller board | A20B-1001-0410 |
| TCMD signal function | Torque command and current-command value for phases R, S and T |
| Amplifier-current limit | 2 A peak for Model 5-0 |
| TCMD signal output at limit | 4.44 V |
| TCMD current conversion | 0.45 A peak per volt |
| Current-value conversion | RMS approximation: peak value × 0.71 |
| Dimensions | 220 × 150 × 140 mm (L × W × H) |
| Weight | 2 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Fanuc A06B-6057-H001?
External dimensions are 220 × 150 × 140 mm in length × width × height order; weight is 2 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.