Fanuc A06B-6114-H210
€1,180.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The complete FANUC order designation A06B-6112-H006#H550 is assigned to the SPM-5.5i spindle amplifier module in the manufacturer manual. The module belongs to the αi amplifier series and the 200-V input series. The TYPE B version identifies two spindle sensor inputs; the separate second sensor input is provided at connector JYA4. The model, functional version, and complete modification suffix are therefore jointly tied to the public identity. The main circuit operates with sinusoidal PWM control and a transistor bridge made up of IGBTs. For the SPM-5.5i, FANUC specifies a rated output current of 27 A. The documented speed-control range is 1:100. With a load change from 10 to 100 percent, the speed deviation is no more than 0.1 percent of maximum speed. For the documented motor power levels of 3.7 kW and 5.5 kW, total heat losses of 120 W and 171 W respectively are specified. Of these, 36 W and 41 W respectively remain as residual heat in the control cabinet. The net weight of the SPM-5.5i is 6.1 kg. The motor power connection uses a Tyco-Electronics-AMP connector from the D-5000 series. An M5 thread with a tightening torque of 2 to 2.5 Nm is documented for flange grounding. The front-side connection scheme also includes a status indicator, PSM interfaces CXA2A and CXA2B, communication connector JX4, and signal connectors JY1, JA7A, and JA7B. The module has an external heatsink. The assigned outline drawing 2 gives a width of 60 mm, a height of 380 mm, and a total depth of 272 mm, including the 100 mm-deep external heatsink. The designation A06B-6112-H006#H550 refers specifically to the TYPE-B version of the SPM-5.5i. Other order designations in the SPM series represent different power levels, input voltages, or sensor-input versions and are not presented as identical.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Fanuc |
|---|---|
| Product Series | FANUC αi Servo Amplifier |
| Manufacturer/Order/Identity Number | A06B-6112-H006#H550 |
| Device Type | Spindle Amplifier Module |
| Model | SPM-5.5i |
| Input Series | 200 V |
| Functional Version | TYPE B |
| Spindle Sensor Inputs | 2 |
| Rated Output Current | 27 A |
| Main Circuit Control | Sinusoidal PWM control with IGBT bridge |
| Speed-Control Range | 1:100 |
| Speed Deviation | ≤ 0.1 % of maximum speed at 10–100 % load change |
| Documented Motor Power Levels | 3.7 kW and 5.5 kW |
| Total Heat Loss | 120 W at 3.7 kW; 171 W at 5.5 kW |
| Residual Heat in Control Cabinet | 36 W at 3.7 kW; 41 W at 5.5 kW |
| Motor Power Connection | Tyco Electronics AMP D-5000 |
| Grounding Thread | M5 |
| Grounding Tightening Torque | 2–2.5 Nm |
| Dimensions | 60 × 380 × 272 mm (W × H × D, including external heatsink) |
| Weight | 6.1 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What model does A06B-6112-H006#H550 designate?
The complete FANUC order designation identifies the SPM-5.5i spindle amplifier module in the TYPE-B version with two spindle sensor inputs.
Which dimensions does the SPM-5.5i have?
The assigned outline drawing 2 gives 60 × 380 × 272 mm including the external heatsink; the net weight is 6.1 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.