Heidenhain 341240-06
€1,170.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Heidenhain 251534-11 is the identification number of the portable HR 330 electronic handwheel. The device belongs to the HR series and carries four axis-selection keys marked X, Y, Z and IV. Separate keys are present for direction and rapid traverse. Data transfer to the control is serial through RS-232 signals, while the documented device connector is a 9-pin D-Sub plug. The coiled cable reaches an extended length of 2.2 m. Electrical supply is +12 V DC from the connected logic unit. A separate 24 V DC circuit is specified for emergency stop. The existing product record assigns the handwheel to the TNC 335, TNC 415, TNC 416, TNC 426 and TNC 430 control series. Its plastic enclosure combines operating keys, handwheel, connection lead and emergency-stop button in one portable unit. Manufacturer, identification number 251534-11 and model designation HR 330 jointly define the exact identity. An exact-item repair page lists complete external dimensions of 26 cm width, 18 cm height and 36 cm depth. They are therefore stated as 26 × 18 × 36 cm in width × height × depth order. No reliable variant-specific manufacturer weight was found, so a conservative product-specific estimate of approx. 1.5 kg is shown. Dimensions and weight refer to the individual handwheel with its attached lead, excluding shipping packaging and additional connection accessories. The specification table lists device and connection data separately and ends with dimensions and weight.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Heidenhain |
|---|---|
| Product series | HR series |
| Manufacturer / order / identification number | 251534-11 |
| Device type | Portable electronic handwheel |
| Coiled-cable length when extended | 2.2 m |
| Connection | D-Sub 9-pin |
| Supply voltage | +12 V DC |
| Data transmission | Serial (RS-232) |
| Emergency stop | 24 V DC (separate safety circuit) |
| Axis-selection keys | 4 (X, Y, Z, IV) |
| Traverse controls | Rapid-traverse and direction keys |
| Enclosure | Impact-resistant plastic enclosure |
| Controller assignment | TNC 335, TNC 415, TNC 416, TNC 426, TNC 430 |
| Application | CNC machine tools, setup mode |
| Cooling method | None (passive device) |
| Dimensions | 26 × 18 × 36 cm (W × H × D) |
| Weight | approx. 1.5 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Heidenhain 251534-11?
Complete external dimensions are 26 × 18 × 36 cm in width × height × depth order. The product-specific estimated weight is approx. 1.5 kg.
Which connection data are documented for Heidenhain 251534-11?
The documented data comprise a 9-pin D-Sub connection, serial RS-232 transmission, +12 V DC supply and a separate 24-V-DC-NOTAUS circuit.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.