Heidenhain 573265-01
€5,110.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The Heidenhain 295434-46 incremental rotary encoder belongs to the ROD 426 series and provides 360 lines per revolution. The output signal is documented as TTL according to RS 422. Supply is 5 V DC (±10 %) and maximum current consumption is 120 mA. Scanning frequency reaches 300 kHz; the mechanically permissible shaft speed reaches 16,000 min⁻¹. The synchro flange has a diameter of 58 mm, a 50 mm centering collar, a 42 mm bolt circle and 3× M4. The solid shaft has a diameter of 6 mm and a usable length of 9.5 mm. Maximum shaft load is 40 N axially and 60 N radially. The enclosure is described as IP64 according to EN 60529. The operating temperature range extends from -40 to +100 °C. Electrical connection uses a male 12-pin M23 connector. Natural convection is specified as the cooling method. The complete identification number 295434-46 distinguishes the variant within the ROD-426 family. Line count, output signal, connection and mechanical interface jointly define the specific product configuration. External dimensions and weight are listed at the end of the specification table and refer to the complete rotary encoder.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Heidenhain |
|---|---|
| Product series | ROD 426 |
| Manufacturer / order / identification number | 295434-46 |
| Encoder type | Incremental rotary encoder |
| Line count | 360 lines per revolution |
| Output signal | TTL (RS 422) |
| Supply voltage | 5 V DC (±10 %) |
| Maximum current consumption | 120 mA |
| Maximum scanning frequency | 300 kHz |
| Maximum shaft speed | 16,000 min⁻¹ |
| Flange design | Synchro flange Ø 58 mm, centring collar 50 mm, bolt circle Ø 42 mm, 3× M4 |
| Shaft diameter | 6 mm (solid shaft, length 9.5 mm) |
| Maximum shaft load | Axial 40 N; radial 60 N |
| Protection class | IP64 (EN 60529) |
| Operating temperature | -40 up to +100 °C |
| Electrical connection | M23 connector, male, 12-pin |
| Cooling method | Natural convection |
| Dimensions | 73 × 57 × 58 mm (L × W × H) |
| Weight | approx. 0.3 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Heidenhain 295434-46?
External dimensions are 73 × 57 × 58 mm in length × width × height order; weight is approx. 0.3 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.