Lenze E82MV551_4B001
€1,360.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Lenze 2133IB, listed under the order designation EMF2133IB, is a PROFIBUS-DP communication module for Lenze drive systems. Device identity is defined by type number 2133IB and PNO ID 2133hex. The module uses RS485 as its communication medium, with the fieldbus connection implemented as a 9-pin Sub-D socket. Supported fieldbus profiles are PROFIBUS-DP-V0 and PROFIBUS-DP-V1, together with the DRIVECOM drive technology 20 and PROFIdrive drive profiles. Baud rate is detected automatically across a range from 9.6 to 12000 kbit/s. Cyclic data exchange uses 1 to 12 process-data words with 16 Bit each. A further 4 parameter-data words are provided. Supply is 24 V DC with a maximum current draw of 120 mA. The station address is set directly through DIP switches on the module. Depending on baud rate and cable type, one bus segment can extend up to 1200 m. The Lenze communication manual shows complete overall dimensions of 61 × 75 × 28 mm for the exact version. These dimensions describe the physical device envelope including the front and module enclosure. A product-specific weight reference gives an estimated individual device weight of ca. 0.10 kg. This approximate value refers to the module without additional shipping packaging. Relevant replacement characteristics include type number, order designation, PROFIBUS profile, connector format, power supply and data-word capacity. The overall dimensions also matter for the existing installation space. Related Lenze communication modules can have different protocols, addressing methods or connector layouts despite a similar enclosure shape.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product series | Lenze PROFIBUS-DP communication module 2133 |
| Manufacturer/order/identification number | 2133IB |
| Device type | Communication module |
| Communication protocol | PROFIBUS-DP-V0 / PROFIBUS-DP-V1 |
| Communication medium | RS485 |
| Fieldbus connection | 9-pin Sub-D socket |
| PNO ID | 2133hex |
| Control profile | DRIVECOM drive technology 20 / PROFIdrive |
| Communication speed | 9.6 to 12000 kbit/s with automatic detection |
| Process-data interface | 1 to 12 words, 16 Bit per word |
| Parameter data | 4 parameter-data words |
| Supply | 24 V DC, 120 mA |
| Station address | DIP switches on the module |
| Bus segment | Up to 1200 m depending on baud rate and cable type |
| Dimensions | 61 × 75 × 28 mm |
| Weight | ca. 0.10 kg |
Related products
Go to shop 
Lenze E82MV752_4B001
Price on request
Lenze E82EV552K2C200
€1,630.00
Lenze E82EV223_4B200
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of the Lenze 2133IB?
Complete overall dimensions are 61 × 75 × 28 mm. The product-specific estimated device weight is ca. 0.10 kg.
Which PROFIBUS data does the EMF2133IB process?
The module processes 1 to 12 process-data words with 16 Bit each plus 4 parameter-data words; baud rate ranges from 9.6 to 12000 kbit/s.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.