Lenze E70ACMSE0204SA1ETR
€2,010.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Lenze E70ACMSE0104SA2ETR is a Double-Axis servo inverter from the i700 series. Its type designation assigns the device to the E70ACMSE0104xx2xxx standard installation design. For this double-axis class, the Lenze hardware manual lists 2 × 5.0 A continuous output current at 4 kHz and 2 × 10.0 A as the short-duration maximum. These variant-specific figures correct the previous presentation of 10.0 A rated current and 20.0 A maximum current as aggregate values. The existing data record lists 3 AC 400 / 480 V, 4.0 kW at 400 V and a DC-bus voltage of DC 565 ... 675 V. EtherCAT provides communication. Safe Torque Off (STO) is the documented safety function. The enclosure has IP20 protection. The overload value is 200 % for 3 s, and the listed switching frequencies are 2, 4, 8, 16 kHz. Cooling uses convection or an external fan. The Lenze hardware manual lists the mechanical data for the standard installation design separately. For E70ACMSE0104xx2xxx, the table specifies 350 mm height, 50 mm width and 261 mm depth. Complete external dimensions in canonical width × height × depth order are therefore 50 × 350 × 261 mm. Documented device weight is 2.9 kg. This replaces the older estimate of approx. 1.60 kg. Dimensions and weight refer to the individual double-axis module without power supply module, cables or shipping packaging. The complete type number remains decisive for assigning number of axes, current class, communication and safety design. Type number, electrical ratings, interfaces, protection, cooling and mechanical data distinguish E70ACMSE0104SA2ETR within the modular i700 system. The specification table ends with Dimensions and Weight.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product series | i700 |
| Manufacturer/order/identification number | E70ACMSE0104SA2ETR |
| Mains voltage | 3 AC 400 / 480 V |
| Continuous output current | 2 × 5.0 A |
| Maximum output current | 2 × 10.0 A |
| Rated power (at 400 V) | 4.0 kW |
| DC-link voltage | DC 565 to 675 V |
| Communication | EtherCAT |
| Safety function | Safe Torque Off (STO) |
| Protection rating | IP20 |
| Overload capacity | 200 % for 3 s |
| Switching frequency | 2, 4, 8, 16 kHz |
| Cooling | Convection or external fan |
| Dimensions | 50 × 350 × 261 mm (W × H × D) |
| Weight | 2.9 kg |
Related products
Go to shop 
Lenze E70ACMSE0324SA1ETR
€2,350.00
Lenze E70ACMSD0054VA1ETR
Price on request
Lenze E70ACMDE0104SA2ETE
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the external dimensions of Lenze E70ACMSE0104SA2ETR?
Complete external dimensions are 50 × 350 × 261 mm in width × height × depth order.
How much does the i700 double-axis module weigh?
The Lenze hardware manual specifies a device weight of 2.9 kg for E70ACMSE0104xx2xxx.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.