Lenze E70ACMSE0104SA2ETR
€1,270.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
E70ACMSD0054VA1ETR belongs to the Lenze i700 series and denotes a single-axis servo inverter in push-through design. The axis module is supplied from the common DC bus of the i700 system. Rated values are 565/675 V DC, and the documented voltage range is 455–746 V DC. Continuous output current is 2.5 A and maximum output current is 5 A. The three-phase output voltage extends to 400/480 V AC. The numerical rated-power value is 0.75 in kilowatts. This power version lists switching frequencies of 4, 8 and 16 kHz and a maximum output frequency of 599 Hz. Communication uses EtherCAT, while motor feedback uses a resolver. Safe Torque Off, abbreviated STO, is included as a safety function. The mounted device has IP20 protection on the electronics side; the heat-sink side of the push-through mounting is rated IP54. In this construction, electronics and connections remain inside the control cabinet while the heat sink passes through the mounting plate. The dimension table states a complete height of 410 mm including mounting, a width of 50 mm, 235 mm depth to the mounting plane and another 60 mm for the external heat sink. This gives a complete depth of 295 mm. Complete external dimensions are therefore 295 × 50 × 410 mm in depth × width × height order. The tabulated weight is 3.0 kg. Type code, current class, DC-bus data, interfaces, mounting design and enclosure dimensions describe this exact version.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product series | Lenze i700 servo inverter |
| Manufacturer / order / identification number | E70ACMSD0054VA1ETR |
| Axis configuration | Single Axis |
| DC input voltage | 565/675 V DC |
| DC-bus voltage range | 455–746 V DC |
| Continuous output current (≤ 40 °C) | 2.5 A |
| Maximum output current (overload) | 5 A |
| Output voltage | 0–400/480 V AC, 3-phase |
| Rated power | 0.75 kW |
| Maximum output frequency | 599 Hz |
| Switching frequency | 4 / 8 / 16 kHz |
| Communication | EtherCAT |
| Motor feedback | Resolver |
| Safety function | STO (Safe Torque Off) |
| Protection rating | IP20 |
| Cooling method | Push-through technology (convection) |
| Dimensions | 295 × 50 × 410 mm (D × W × H, incl. mounting and heat sink) |
| Weight | 3.0 kg |
Related products
Go to shop 
Lenze E70ACMSE0324SA1ETR
€2,350.00
Lenze E70ACMSE0204SA1ETR
€2,010.00
Lenze E70ACMDE0104SA2ETE
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Lenze E70ACMSD0054VA1ETR?
Complete external dimensions including mounting and heat sink are 295 × 50 × 410 mm in depth × width × height order. Weight is 3.0 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.