Lenze MCS09F38-SRMP1-A14N-ST5S00N-R0SU
€670.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Lenze MCS14L32-RS0B0-A24N-ST5S00N-R0SU is a permanent-magnet synchronous servo motor from the MCS range. The complete type number identifies the documented version with resolver feedback, without a holding brake and with a cylindrical shaft. Rated power is 5.8 kW at 3,225 min⁻¹. Lenze specifies 17.2 Nm rated torque and 77 Nm maximum torque. Frame size 14 and the full type code distinguish this variant from other MCS power and speed stages. Code A24N describes a shaft with a diameter of 24 mm and a length of 50 mm without a keyway, together with the corresponding standard flange version. A resolver with one pole pair is documented as the feedback system. B0 identifies the version without a brake. ST denotes separate circular connectors, the following 5 denotes IP54 without a shaft seal, and S00 denotes self-cooling without a fan. These characteristics support clear technical identification for maintenance, inventory checks and documented spare-parts procurement. Values from other MCS14 variants are not applied to this motor. The current Lenze motor brochure lists MCS 14L32 with a height of 217.5 mm, a length of 331 mm and a depth of 143 mm. In consistent width × height × depth order, complete outside dimensions are 143 × 217.5 × 331 mm. Weight in the same table row is 20.8 kg. These figures refer to the complete MCS14L32 motor form, not merely its shaft, flange or shipping package. Outside dimensions and weight are therefore directly assigned to the official Lenze variant row.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product series | Lenze MCS servomotors |
| Manufacturer / order / identification number | MCS14L32-RS0B0-A24N-ST5S00N-R0SU |
| Motor frame size | 14 |
| Motor type | Permanent-magnet synchronous motor |
| Rated voltage | approx. 315 V (three-phase) |
| Rated power | 5.8 kW |
| Rated speed | 3225 min⁻¹ |
| Rated torque | 17.2 Nm |
| Maximum torque | 77 Nm |
| Shaft version | Cylindrical shaft without keyway, 24 × 50 mm (A24N) |
| Flange version | Standard A/FF flange shape with through holes (A24N) |
| Feedback system | Resolver p = 1 (RS0) |
| Degree of protection | IP54 without shaft seal (code 5) |
| Cooling method | Self-cooling without fan (S00) |
| Dimensions | 143 × 217.5 × 331 mm (W × H × D) |
| Weight | 20.8 kg |
Related products
Go to shop 
Lenze GPA00-2SGCN006FN41
€670.00
Lenze DSVARS100-22
Price on request
Lenze MCS19J30-RS0B0-B28N-ST5S00N-R0SU
€1,160.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the outside dimensions of Lenze MCS14L32-RS0B0-A24N-ST5S00N-R0SU?
Complete outside dimensions are 143 × 217.5 × 331 mm in width × height × depth order.
What is the weight of Lenze MCS14L32?
The Lenze motor brochure lists a weight of 20.8 kg for MCS 14L32.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.