Lenze EVS9327-EK
€6,550.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The full designation Lenze MDERAXX-063-21J is visible on the nameplate of the photographed motor. The MDERA type code identifies a self-ventilated three-phase asynchronous motor. Code 063 denotes the frame size, while the following digit 2 represents medium motor length M. Digit 1 assigns the version to the speed class near 3000 min⁻¹ at 50 Hz. Within this range, the two characters XX specify B3 foot mounting. The product image shows the motor feet, top-mounted terminal box and rear fan cover. A separate black mechanical assembly is attached on the drive end. That customer-specific assembly is outside the catalogued motor envelope and is not included in the dimensions. For frame size 063, the Lenze dimension table states an overall motor length of 225 mm, a maximum width of 120 mm and an overall height of 178 mm including the terminal box. The specification table therefore records 225 × 120 × 178 mm in length × width × height order. A shaft diameter of 11 mm and shaft extension of 23 mm are also documented. The enclosure is specified with protection rating IP 55 and insulation class F. The available catalog does not list a separate exact mass for motor-length version 063-21. Weight is consequently shown transparently as a conservative product-specific estimate of approx. 5.0 kg for the motor without the black attached mechanism. The complete type number remains decisive for identifying its mechanical and electrical version.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Lenze |
|---|---|
| Product series | MDERA |
| Manufacturer / order / identification number | MDERAXX-063-21J |
| Motor type | Three-phase asynchronous motor, self-ventilated |
| Frame size | 063 |
| Motor length code | 2 (M) |
| Speed class | 3000 min⁻¹ at 50 Hz |
| Mounting arrangement | B3 foot mounting |
| Protection rating | IP 55 |
| Insulation class | F |
| Shaft diameter | 11 mm |
| Shaft extension | 23 mm |
| Dimensions | 225 × 120 × 178 mm (L × W × H; motor without attached mechanism) |
| Weight | approx. 5.0 kg (motor without attached mechanism) |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Lenze MDERAXX-063-21J?
The type-number-bound motor measures 225 × 120 × 178 mm in length × width × height order. Estimated motor weight is approx. 5.0 kg; the pictured black attached mechanism is excluded from both values.
Which mounting arrangement does MDERAXX-063-21J use?
The XX code denotes B3 foot mounting in the MDERA range; 063 denotes the frame size and 2 the M motor length.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.