Siemens 1FT5062-1AC71-4AA0
€1,020.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The complete designation Siemens 1FT5062-0AC01-Z identifies a permanent-magnet AC servomotor in the 1FT5 series. Within this family, size 5062 represents shaft height 63 mm and short length code 2. The specific 210-V version is rated with 2.6 Nm torque at 2000 U/min. The motor is naturally cooled and uses the IM B5 flange construction; IM V1 and IM V3 are listed as corresponding mounting positions. Its protection rating is IP64. Feedback equipment comprises a tachogenerator and a shaft-position encoder. Power conductors terminate in the terminal box, while the signal connection uses a separate connector. This combination of voltage level, torque, speed, feedback and connection arrangement distinguishes the item within the 1FT5 range. The Siemens planning guide also documents a 19-mm shaft, a shaft extension of 40 mm and a centring diameter of 95 mm for the basic 1FT5062 type. For the exact dealer record 1FT5062-0AC01-0-Z, complete external dimensions are stated as 38 × 29 × 33 cm in length × width × height order, together with a weight of 7 kg. These figures describe the dealer external dimensions. Assignment therefore depends on the complete type designation, 210-V version, length code 2, construction, feedback equipment and connection arrangement taken together.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | 1FT5 |
| Manufacturer / order / identification number | 1FT5062-0AC01-Z |
| Device family | AC Servomotor Series 5 |
| Product type | AC servo motor |
| Motor type | Permanent-magnet motor |
| Frame size | 63 mm |
| Construction length | 2 |
| Version | Standard type |
| Cooling method | Natural cooling |
| DC-link voltage | 210 V DC |
| Torque | 2.6 Nm |
| Rated speed | 2000 rpm |
| Degree of protection | IP64 |
| Mounting arrangement | IM B5 (IM V1, IM V3) |
| Feedback | Tachogenerator and shaft-position encoder |
| Connection type | Terminal box and signal connector |
| Dimensions | 38 × 29 × 33 cm (L × W × H; dealer external dimensions) |
| Weight | 7 kg |
Related products
Go to shop 
Siemens 1FT5071-0AC01-Z
Price on request
Siemens 1FT5073-0AC01-Z
€1,250.00
Siemens 1FT5072-1AF71-1AA0
€1,250.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 1FT5062-0AC01-Z?
The exact dealer record states external dimensions of 38 × 29 × 33 cm in length × width × height order and a weight of 7 kg.
What are the basic mechanical data of Siemens 1FT5062-0AC01-Z?
The basic 1FT5062 type has frame size 63, a 19-mm shaft with an extension of 40 mm and a centring diameter of 95 mm.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.