Siemens 6SE7037-0TJ60-Z
€21,010.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
The complete type number Siemens 1FT5073-0AC01-Z identifies an AC servo motor in the 1FT5 series. Its type code denotes frame size 71, length code 3, natural cooling and a rated speed of 2,000 min⁻¹. Construction is IM B5 with IM V1 and IM V3 mounting positions. The base motor has IP64 protection. Its flange has an outside diameter of 185 mm, a 130 mm centring diameter and four mounting holes with 11 mm diameter. The shaft is 19 mm in diameter and projects 28 mm beyond the flange face. The key size is 6 × 6 × 28 mm. The motor housing has a square cross-section of 142 mm. Complete axial length for type 1FT5073 is 223 mm. Using the largest flange diameter, complete external dimensions are therefore 223 × 185 × 185 mm in length × width × height order. Actual weight depends on the mechanical and electrical configuration present. Its mass is consequently shown as a conservative product-specific estimate of approximately 12 kg. Mechanical comparison should separately cover the complete type number, flange contour, centring diameter, shaft dimensions, connector outlet and the encoder and brake configuration actually installed. The installation comparison also includes the four flange holes, connection positions and available axial space.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | 1FT5 |
| Manufacturer / order / identification number | 1FT5073-0AC01-Z |
| Device type | AC servo motor |
| DC-link voltage | ZK 210 V |
| Torque | 9 Nm according to BVS |
| Frame size | 71 mm |
| Construction length | 3 |
| Cooling | Unventilated and self-cooled |
| Rated speed | 2000 rpm |
| Mounting arrangement | IM B5 (IM V1, IM V3) |
| Protection rating | IP64 according to BVS |
| Additional suffix | Z |
| Dimensions | 223 × 185 × 185 mm (L × W × H) |
| Weight | approx. 12 kg |
Related products
Go to shop 
Siemens 6RA2281-6DS22-0
€6,240.00
Siemens 6SN1145-1BA01-0DA1
€5,390.00
Siemens 6SE3214-0DA40
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 1FT5073-0AC01-Z?
Complete external dimensions are 223 × 185 × 185 mm in length × width × height order. Product-specific estimated weight is approximately 12 kg.
What are the main mechanical dimensions of Siemens 1FT5073-0AC01-Z?
The 1FT5 drawing specifies a 185 mm flange diameter, 130 mm centring diameter, 19 mm shaft diameter and 28 mm shaft projection from the flange face.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.