Siemens 1FT7105-5WF71-4KH1
€3,190.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 1FT6034-4AK71-4EG1-Z is a permanent-magnet synchronous servomotor from the SIMOTICS S 1FT6 product series. The basic 1FT6034-4AK71-4EG1 version is naturally cooled and has a rated speed of 6000 min⁻¹. At a temperature rise of 100 K, Siemens documents rated torque of 1.4 Nm at 2.1 A and standstill torque of 2.0 Nm at 2.6 A. The optimum operating point is 0.88 kW. For short dynamic demands, the configuration manual lists a maximum permissible mechanical speed of 9700 min⁻¹, maximum torque of 7.7 Nm and maximum current of 10.5 A. The variant configuration includes an EnDat absolute encoder with 2048 signal periods per revolution, a smooth shaft with concentricity tolerance N and no holding brake. Listed mounting positions are IM B5, IM V1 and IM V3. Protection is specified as IP65 with a gamma sealing ring. The Siemens dimension drawing yields complete external dimensions of 290 × 92 × 92 mm in length × width × height order, including the shaft. Documented motor weight for the unbraked version is 4.4 kg. The complete order number including suffix -Z records the encoder version, shaft, brake and connector orientation needed for an exact variant assignment. Controller parameters, permissible cables, mounting conditions and machine load data remain relevant to installation planning. The exact designation distinguishes this motor from adjacent versions with different feedback, brake or connection configurations.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S 1FT6 |
| Manufacturer/Order/Identification number | 1FT6034-4AK71-4EG1-Z |
| Equipment type | Permanent-magnet synchronous servomotor |
| Rated speed | 6000 min⁻¹ |
| Rated torque (100 K) | 1.4 Nm |
| Rated current (100 K) | 2.1 A |
| Standstill torque (100 K) | 2.0 Nm |
| Standstill current (100 K) | 2.6 A |
| Optimum output | 0.88 kW |
| Maximum permissible speed | 9700 min⁻¹ |
| Maximum torque | 7.7 Nm |
| Maximum current | 10.5 A |
| Mounting design | IM B5; mounting positions IM V1 and IM V3 are listed |
| Encoder | EnDat absolute encoder, 2048 signal periods/revolution |
| Shaft | Smooth shaft, concentricity tolerance N |
| Holding brake | Without holding brake |
| Protection rating | IP65 with gamma sealing ring |
| Dimensions | 290 × 92 × 92 mm (L × W × H; including shaft) |
| Weight | 4.4 kg |
Related products
Go to shop 
Siemens 1FT6084-8AK71-3AA0
€3,430.00
Siemens 1FT6105-8AB71-1AB0
€2,850.00
Siemens 1FT6102-8AF71-4AH0
€5,360.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Siemens 1FT6034-4AK71-4EG1-Z?
Complete external dimensions are 290 × 92 × 92 mm in length × width × height order, including the shaft.
How much does Siemens 1FT6034-4AK71-4EG1-Z weigh?
The Siemens configuration manual lists a motor weight of 4.4 kg for the unbraked version.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.