Siemens 1FT6105-1AC71-1AG1
€370.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 1FT6105-1AC71-3AG1 is a naturally cooled synchronous servo motor from the SIMOTICS S 1FT6 product series. The complete order number identifies the version with 50 Nm standstill torque at 100 K and a rated speed of 2,000 min⁻¹. IP65 protection, IM B5 flange mounting and the documented IM V1 and IM V3 mounting positions belong to this configuration. Controlled servo axes in industrial machinery are the typical application area for this equipment type. Position feedback is provided by a sin/cos 1 Vpp incremental encoder with 2,048 signal periods per revolution. Power and signal connections use connectors with an axial outlet on the non-drive end. This version has no holding brake. These features must be considered together with the motor cable, encoder cable, mechanical mounting and the machine-side braking concept. The Siemens dimension sheet for the naturally cooled 1FT6105 specifies a 370 mm installation length without a holding brake. Shaft extension is 80 mm and the flange reaches 240 mm across its diagonal corner points. The resulting envelope including the shaft is 450 × 240 × 240 mm. Connected cables and their bending radii are not included and require additional machine-specific clearance. Documented motor weight without holding brake is 39.5 kg. Complete order number, torque class, rated speed, encoder version, connector direction, flange mounting, mounting position, degree of protection, absence of a holding brake, dimensions and weight together establish the exact spare-part identity. This combination distinguishes 1FT6105-1AC71-3AG1 from other motors in the series.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S |
| Manufacturer/order/identification number | 1FT6105-1AC71-3AG1 |
| Series | 1FT6 |
| Equipment type | Synchronous servo motor |
| Standstill torque at 100 K | 50 Nm |
| Rated speed | 2,000 min⁻¹ |
| Cooling | Natural cooling |
| Degree of protection | IP65 |
| Flange mounting | IM B5 |
| Mounting positions | IM V1, IM V3 |
| Encoder type | sin/cos 1 Vpp incremental encoder |
| Encoder resolution | 2,048 S/R |
| Connection configuration | Power and signal connectors |
| Connector outlet | Axial on the non-drive end |
| Holding brake | Without holding brake |
| Dimensions | 450 × 240 × 240 mm (L × W × H; motor envelope incl. 80-mm shaft; installation length 370 mm) |
| Weight | 39.5 kg |
Related products
Go to shop 
Siemens 1FT6082-8AF71-3AH1
€2,930.00
Siemens 1FT6082-1AH71-3AH1
€3,520.00
Siemens 1FT6084-1AH71-3EH1
€2,930.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 1FT6105-1AC71-3AG1?
The envelope including the 80-mm shaft is 450 × 240 × 240 mm with a 370 mm installation length. Documented weight without holding brake is 39.5 kg.
Which encoder and brake version are documented?
The documented version has a sin/cos 1 Vpp incremental encoder with 2,048 S/R, axial connectors on the non-drive end and no holding brake.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.