Siemens 1FT6084-1AH71-3EH1
€2,930.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Natural cooling and a holding brake characterize Siemens 1FT6082-1AH71-3AH1 as a permanent-magnet synchronous servomotor from the 1FT6 product series. The winding version operates at 4,500 min⁻¹ rated speed and has eight poles. At a 100 K temperature rise, the configuration manual lists 8.5 Nm rated torque and 11 A rated current. Standstill torque is 10.8 Nm at 60 K and 13 Nm at 100 K. The corresponding standstill currents are 12 A and 14.8 A. Listed limits are 7,900 min⁻¹ maximum permissible mechanical speed, 42 Nm maximum torque and 60 A maximum current. Feedback is provided by a Sin/Cos incremental encoder with a 1-Vpp signal and 2,048 signal periods per revolution. The complete order code identifies a smooth shaft, integrated holding brake, IP65 protection and power and signal connections directed axially towards the non-drive end. The Siemens dimension sheet lists a 273 mm installation length and 58 mm shaft extension for the braked 1FT6082. This results in a complete axial motor envelope of 331 mm. The flange reaches 194 mm across its diagonal corner points, giving an external envelope of 331 × 194 × 194 mm in length × width × height order without connected cables. Documented weight with holding brake is 16.5 kg. These figures describe the mechanical envelope for installation planning, storage, handling and transport. The full 1FT6 order identifier records encoder, connector direction, shaft, brake and protection.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOTICS S / 1FT6 |
| Manufacturer/order/identification number | 1FT6082-1AH71-3AH1 |
| Product type | AC feed motor / servomotor |
| DC link | 600 V DC link |
| Standstill torque | 13 Nm at 100 K |
| Rated speed | 4500 rpm |
| Cooling | Natural cooling |
| Protection rating | IP65 |
| Mounting design | IM B5 |
| Installation positions | IM V1 / IM V3 |
| Encoder system | sin/cos 1 Vpp incremental encoder |
| Encoder resolution | 2048 S/R, encoder I-2048 |
| Connection type | Power and signal connectors |
| Connector outlet | Axial on the non-drive end |
| Brake configuration | With holding brake |
| Dimensions | 331 × 194 × 194 mm (L × W × H; motor envelope including 58-mm shaft, without connected cables) |
| Weight | 16.5 kg |
Related products
Go to shop 
Siemens 1FT6086-1AF71-1AG1
€680.00
Siemens 1FT5074-0AK01-2
€780.00
Siemens 1FT5072-1AF71-1FG0
€1,430.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions of Siemens 1FT6082-1AH71-3AH1?
The motor envelope including the 58-mm shaft is 331 × 194 × 194 mm in length × width × height order, without connected cables.
How much does Siemens 1FT6082-1AH71-3AH1 weigh?
Documented weight for the version with holding brake is 16.5 kg.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.