Siemens 1FT6082-1AH71-3AH1
€3,520.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
With a specified 60 mm shaft and overall dimensions of 1070 × 360 × 360 mm, the Siemens 1HU3132-0AC01-0ZZ9-Z belongs to the large-format DC servo motors of the 1HU3 series. This unit consists of a permanent-magnet, non-ventilated servo motor and a Lenze reversing gearbox. The gearbox identifier is 12 204 25 1 2 1, while the specified step ratio is 2.0. A tachometer forms part of the described assembly. The electrical ratings of this version include a rated power of 1.8 kW and a rated voltage of 167 V. The motor speed is specified as 1000 U/min. The basic 1HU3132-0AC01 version is assigned a continuous torque of 47 Nm and a continuous current of 31 A. The non-ventilated construction and IP54 protection rating describe the design of the motor enclosure. Motor and gearbox form one integrated drive unit. The Siemens motor identifier, the separate Lenze identifier and the mechanical measurements are therefore recorded as distinct identity and installation data. The shaft value denotes a diameter of 60 mm. The stated external dimensions refer to the complete servo motor and reversing gearbox assembly. The separate gearbox identifier distinguishes the Lenze component from the Siemens motor identifier. The tachometer belongs to the recorded assembly; its detailed electrical version is not part of the available ratings. The 1HU3 series comprises permanent-magnet DC servo motors in controlled drive technology. This version is defined by the combination of 47 Nm continuous torque, 1000 U/min, 167 V and the attached reversing gearbox. The complete Siemens identifier is 1HU3132-0AC01-0ZZ9-Z.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | Siemens 1HU3 |
| Manufacturer/order/identification number | 1HU3132-0AC01-0ZZ9-Z |
| Device type | DC servo motor with reversing gearbox |
| Excitation type | Permanent-magnet excited |
| Cooling type | Non-ventilated |
| Rated power | 1.8 kW |
| Rated speed | 1000 U/min |
| Rated voltage | 167 V |
| Continuous torque | 47 Nm |
| Continuous current | 31 A |
| Protection rating | IP54 |
| Gearbox manufacturer | Lenze |
| Gearbox identifier | 12 204 25 1 2 1 |
| Step ratio | 2.0 |
| Shaft diameter | 60 mm |
| Dimensions | 1070 × 360 × 360 mm |
| Weight | approx. 180 kg |
Related products
Go to shop
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which electrical ratings are specified for the Siemens 1HU3132-0AC01-0ZZ9-Z?
The specified data for this unit are 1.8 kW rated power, 167 V rated voltage and 1000 U/min. The Siemens SIMODRIVE table also lists 47 Nm continuous torque and 31 A continuous current for the basic version.
Which mechanical data belong to the complete motor and gearbox unit?
The unit includes a Lenze reversing gearbox identified as 12 204 25 1 2 1 with a step ratio of 2.0. The shaft diameter is 60 mm and the overall dimensions are 1070 × 360 × 360 mm.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.