Siemens 6AV2123-2DB03-0AX0
€403.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
A 100-MHz Pentium and 8 MB of RAM determine the computer configuration of the Siemens 6AV3637-1LL00-0FX1. The Operator Panel OP37 is supplied without a hard drive, but with a floppy disk drive. For project planning, ProTool from version 5.2 onwards is documented. This type number therefore belongs to the classic SIMATIC HMI generation with local, key-controlled operation. The display is via a 10.4-inch STN color graphics display. Its resolution is 640 × 480 pixels. The panel has no touchscreen; inputs are made via 32 function keys and a numeric keypad. The front-side protection class IP65 supports installation in an operating console, while the rear side corresponds to IP20. MPI and PROFIBUS-DP are available for automation connection. Additionally, serial interfaces according to RS 232 and RS 422/485 are present. The documented automation context comprises bus parameterization, project file, connector assignment, and plant communication. The supply is with 24 V DC. The typical power consumption is approximately 24 W. Visualization, ProTool project, communication parameters, and storage media form the device-specific project data; no modern automatic project transfer is specified. The permissible operating temperature range ranges from 0 to 50 °C; for storage, minus 20 to 60 °C are specified. The panel measures 482 × 246 × 66 mm. The required panel cutout is 450 × 220 mm. The weight is approximately 8 kg. Processor, memory size, color display, floppy disk drive and missing hard drive distinguish 6AV3637-1LL00-0FX1 from other OP37 versions without additional verification.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product Series | SIMATIC HMI OP37 |
| Manufacturer/Order/ID Number | 6AV3637-1LL00-0FX1 |
| Device Type | Operator Panel OP37 |
| Processor | Pentium, 100 MHz |
| RAM | 8 MB RAM |
| Mass Storage | without hard drive, with floppy disk drive |
| Display | 10.4 inch STN color graphics |
| Resolution | 640 × 480 pixels |
| Operation | 32 function keys and numeric keypad; no touchscreen |
| Supply | 24 V DC |
| Power Consumption | approx. 24 W |
| Interfaces | MPI/PROFIBUS-DP, RS 232, RS 422/485 |
| Protection Class | IP65 Front / IP20 Rear |
| Operating Temperature | 0–50 °C |
| Dimensions | 482 × 246 × 66 mm; Cutout 450 × 220 mm |
| Weight | approx. 8 kg |
Related products
Go to shop 
Siemens 6AV2 123-2JB03-0AX0
€1,105.00
Siemens 6AV2124-0JC01-0AX0
€1,010.00
Siemens 6AV2 124-0UC02-0AX1
€5,080.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Does Siemens 6AV3637-1LL00-0FX1 have a touchscreen?
No. The OP37 is operated via 32 function keys and a numeric keypad.
Which fieldbus connections does the OP37 support?
MPI and PROFIBUS-DP as well as serial RS-232 and RS-422/485 interfaces are available for plant communication.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.