Siemens 6ES7 318-3EL01-0AB0
€1,240.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6ES7 317-2EK14-0AB0 is a central processing unit from the SIMATIC S7-300 range with the device designation CPU 317-2 PN/DP. Documented hardware function status is 01 and firmware version is V3.2. For engineering, Siemens specifies STEP 7 from V5.5. Supply is 24 V DC within a permissible range of 20.4 to 28.8 V DC. Rated current consumption is 750 mA; the data sheet lists typical no-load consumption of 150 mA. Typical power loss is 4.65 W. Integrated, non-expandable work memory is 1,024 KB. A Micro Memory Card is required as load memory, with cards up to 8 MB supported. The first interface combines MPI and PROFIBUS DP at up to 12 Mbit/s. The second interface is Ethernet PROFINET with an integrated 2-port switch. Isochronous operation is documented through PROFIBUS DP or PROFINET. For bit operations, the data sheet gives a typical processing time of 0.025 µs. Mechanical data come from the exact Siemens data sheet for this MLFB. It specifies 40 mm width, 125 mm height and 130 mm depth. In consistent width × height × depth order, complete external dimensions are 40 × 125 × 130 mm. Device weight is stated as approximately 340 g. Dimensions and weight refer to the individual CPU module without Micro Memory Card, front connector, cables or packaging. Type number, hardware status, firmware, memory, communication interfaces and mechanical data distinguish this version from other CPU-317 variants. The specification table concludes with Dimensions and Weight.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC S7-300 |
| Manufacturer / order / identification number | 6ES7 317-2EK14-0AB0 |
| Device type | CPU 317-2 PN/DP central processing unit |
| Hardware function status | 01 |
| Firmware version | V3.2 |
| Engineering | STEP 7 from V5.5 |
| Supply voltage | 24 V DC |
| Permissible voltage range | 20.4 to 28.8 V DC |
| Rated current consumption | 750 mA |
| No-load current consumption | typically 150 mA |
| Power loss | typically 4.65 W |
| Work memory | 1,024 KB integrated, not expandable |
| Load memory | Micro Memory Card required, up to 8 MB |
| First interface | MPI/PROFIBUS DP up to 12 Mbit/s |
| Second interface | Ethernet PROFINET with integrated 2-port switch |
| Isochronous operation | through PROFIBUS DP or PROFINET interface |
| Bit operations | typically 0.025 µs |
| Dimensions | 40 × 125 × 130 mm (W × H × D) |
| Weight | approx. 340 g |
Related products
Go to shop 
Siemens 6ES7 315-2EH14-0AB0
€790.00
Siemens 6ES7 314-6BH04-0AB0
€3,070.00
Siemens 6ES7 416-2FK02-0AB0
€1,580.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the external dimensions of Siemens 6ES7 317-2EK14-0AB0?
Complete external dimensions are 40 × 125 × 130 mm in width × height × depth order.
How much does CPU 317-2 PN/DP weigh?
The Siemens data sheet specifies an approximate module weight of 340 g.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.