Siemens 6ES7 317-2EK14-0AB0
€1,430.00
Do you require same-day delivery or express shipping with a defined delivery time for this item?
Please contact us!
The Siemens 6ES7 315-2AH14-0AB0 is the SIMATIC-S7-300 central processing unit CPU 315-2 DP for conventional control tasks in machinery, production lines, and installed systems. The CPU combines 256 KB of integrated work memory with an MPI interface and a second PROFIBUS DP interface that can operate as master or slave. It is particularly suitable for plants with distributed I/O, drives, or operator devices where the existing PROFIBUS architecture must be retained. Siemens specifies hardware function status 01 and firmware V3.3. Engineering requires STEP 7 from V5.5 SP1; alternatively, STEP 7 from V5.2 SP1 with HSP 218 can be used. The module operates with a 24 V DC supply across a permissible range from 19.2 to 28.8 V. Rated current consumption is 850 mA, while typical no-load consumption is 150 mA. Typical inrush current is 3.5 A and typical power loss is 4.5 W. A Micro Memory Card is required as load memory and may provide up to 8 MB. Programs and data are retained through the maintenance-free MMC without a backup battery. The CPU supports isochronous operation. Typical processing times are 0.05 µs for bit operations, 0.09 µs for word operations, and 0.12 µs for fixed-point arithmetic. Before replacement, compare the complete order number, firmware level, STEP-7 project, MPI address, PROFIBUS configuration, and installed Micro Memory Card. The exact MLFB is important because older CPU-315-2-DP variants may use different memory capacities, firmware levels, or memory cards. This version provides a clearly documented basis for exact-type replacement in existing S7-300 installations.
| Manufacturer | Siemens |
|---|---|
| Product range | SIMATIC S7-300 |
| Manufacturer / order / identification number | 6ES7 315-2AH14-0AB0 |
| Device type | CPU 315-2 DP central processing unit |
| Hardware function status | 01 |
| Firmware version | V3.3 |
| Engineering | STEP 7 from V5.5 SP1 or from V5.2 SP1 with HSP 218 |
| Supply voltage | 24 V DC |
| Permissible voltage range | 19.2 to 28.8 V DC |
| Rated current consumption | 850 mA |
| No-load current consumption | typically 150 mA |
| Inrush current | typically 3.5 A |
| Power loss | typically 4.5 W |
| Work memory | 256 KB integrated, not expandable |
| Load memory | Micro Memory Card required, up to 8 MB |
| First interface | MPI |
| Second interface | PROFIBUS DP master/slave |
| Isochronous operation | supported |
| Bit operations | typically 0.05 µs |
| Word operations | typically 0.09 µs |
Machine downtime?
Is your machine down and do you require particularly fast delivery? Tell us directly. We will do everything possible to provide a quotation with the fastest available delivery and find a solution that matches your schedule.
Our highest priority is to keep your production processes running. Rely on our expertise and flexible service to minimise machine downtime effectively.
Contact us now!Manufacturer / EU responsible person
The CPU provides an MPI interface and a second PROFIBUS DP interface that can operate as DP master or DP slave.
A SIMATIC Micro Memory Card is required as load memory; Siemens specifies a supported capacity of up to 8 MB.
Yes, we provide a 14-day functional guarantee for used items. This means the component must be operational when received.
Please note that the guarantee only applies when the warranty seal is undamaged.
If a defect occurs within 14 calendar days, please contact us in writing. Subject to availability, we will provide a replacement or refund the full purchase price after return.
Further details are provided in the terms and conditions supplied with your quotation.
We generally dispatch immediately - in many cases on the same working day. For particularly urgent requirements or machine downtime, we find a suitable solution as quickly as possible and provide a specific delivery window on request.
Express shipping or collection from our premises is also possible, depending on the situation. State your requirements during the ordering process or contact us directly.
We ship worldwide and work with reliable shipping partners, from parcel services to freight forwarding. Freight shipments normally require some preparation so the goods arrive safely and undamaged.
Payment is normally made by bank transfer against invoice. Payment is due within 10 calendar days of receiving the goods.
As a rule, we offer purchase on account for all customers. In individual cases, such as new customers or particularly high-value components, we may agree advance payment. This decision is made individually and communicated transparently.
Because we sell exclusively to business customers (B2B), there is no general right of return and no consumer right of withdrawal.
Please note that returns of functioning goods are generally excluded. In justified exceptional cases, we can assess an individual solution, but this is not the standard procedure.
For larger order quantities or several items of one type, we can offer individual discounts.
Simply send us a quick enquiry - we check availability and will gladly prepare a tailored quotation with quantity pricing.
Yes, we also purchase automation components, such as frequency inverters, PLC assemblies, panels, servo motors and CPUs. Components from Siemens, Lenze, Schneider Electric, Control Techniques or Heidenhain are especially sought after, and other brands are also possible.
The process is straightforward: email us an inventory list or overview photos at info@reha-industriekomponenten.de. We calculate a market-based purchase price and send you an offer.
Receive a quotation by email
Complete the form with your enquiry. We will respond with price, availability and delivery time.