Siemens 6ES7193-6BP00-0BA0
€130.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6ES7 131-6BF01-0BA0 is a SIMATIC ET 200SP DI 8x24VDC ST digital input module for distributed input signals in compact I/O stations. The module is assigned to BaseUnit type A0 and processes eight digital 24-V-DC inputs. Siemens specifies a 24-V sensor supply, maximum current consumption of 50 mA, typical power dissipation of 1 W and an address area of 1 byte of input data plus 1 byte of QI. Similar ET-200SP-DI modules may use different BaseUnits, diagnostics or timing parameters. The documented product data also list A0. The technical documentation additionally specifies A0. The documented signal limits are −30 to +5 V for signal 0 and +11 to +30 V for signal 1; typical input current at signal 1 is 2.5 mA. Documented identifiers and values: 6ES7131-6BF01-0BA0; 24 V; 15; 73; 58 mm; 28 g. The documented value for Equipment type is DI 8x24VDC ST digital input module. The documented value for Input delay is configurable from 0.05 to 20 ms. Siemens describes the inputs as IEC 61131 Type 3, PNP/sink inputs with P-reading signal logic. The module measures 15 x 73 x 58 mm and weighs approximately 28 g.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC ET 200SP |
| Manufacturer/Order/Identification number | 6ES7131-6BF01-0BA0 |
| Equipment type | DI 8x24VDC ST digital input module |
| Inputs | 8 digital inputs |
| Input type | IEC 61131 Type 3, PNP/sink input |
| Input voltage | 24 V DC nominal |
| Signal 0 | -30 to +5 V |
| Signal 1 | +11 to +30 V, typically 2.5 mA |
| Input delay | configurable from 0.05 to 20 ms |
| Sensor supply | 24 V DC, all channels supplied through the sensor supply |
| Two-wire sensor | supported, maximum quiescent current 1.5 mA |
| Diagnostics | supply, sensor supply, wire break and short circuit |
| Address area | 1 byte of input data plus 1 byte of QI |
| Current consumption | maximum 50 mA |
| Power dissipation | typically 1 W |
| Dimensions | 15 x 73 x 58 mm |
| Cooling method | The product data lists the documented identification and technical characteristics for this component. Documented identifiers and values: ET-200SP. |
| Weight | approximately 28 g |
Related products
Go to shop 
Siemens 6ES7193-6BP20-0BA0
€104.00
Siemens 6ES7155-6AU01-0CN0
€370.00
Siemens 6ES7132-6BH01-0BA0
€150.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7131-6BF01-0BA0?
The full manufacturer and type number 6ES7131-6BF01-0BA0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.