Shipping information
Do you require an expedited shipping option for this item?
Please contact us!
Product description
Siemens 6ES7134-6HB00-0CA1 is an analog input module from the SIMATIC ET 200SP series with the designation AI 2xU/I 2-/4-wire HF. The module provides two analog inputs and processes voltage and current signals. Siemens documents a resolution of up to 16 bit including sign. Voltage measurement can be configured for each channel, while current measurement supports 2-wire and 4-wire transducers. The two channels are electrically isolated from each other. The specified measurement principle is sigma delta. Current ranges include 0 to 20 mA, -20 to +20 mA and 4 to 20 mA. Integration time can be parameterized from 0.625 to 67.5 ms depending on the selected setting. The resulting documented conversion times per channel range from 0.9 to 68.2 ms. Six smoothing levels from no smoothing to 32-fold smoothing can be configured. Channel-specific diagnostic messages include wire break, short circuit, overflow and underflow. Siemens specifies BaseUnit types A0 and A1 and color code CC05. Isolation is tested with 707 V DC. A maximum of 1,000 m is documented for shielded cables and 200 m for voltage measurement. Operation is specified from -30 to 60 °C in horizontal installation and up to 50 °C in vertical installation, with temperatures below 0 °C applying from functional status FS06. The housing measures 15 x 73 x 58 mm and weighs approximately 32 g. Maximum installation altitude is 5,000 m. All values refer to the exact order number 6ES7134-6HB00-0CA1.
Example image – The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC ET 200SP |
| Manufacturer/order/identification number | 6ES7134-6HB00-0CA1 |
| Module type | AI 2xU/I 2-/4-wire HF analog input module |
| Number of inputs | 2 analog inputs |
| Resolution | up to 16 bit including sign |
| Measurement types | Voltage; current through 2-wire or 4-wire transducers |
| Current measuring ranges | 0 to 20 mA; -20 to +20 mA; 4 to 20 mA |
| Measurement principle | Sigma delta |
| Integration time | configurable, 0.625 to 67.5 ms |
| Conversion time per channel | 0.9 to 68.2 ms depending on setting |
| Measured value smoothing | 6 levels: none and 2-, 4-, 8-, 16- or 32-fold |
| Channel isolation | individual channel electrical isolation |
| Diagnostic functions | wire break, short circuit, overflow and underflow by channel |
| BaseUnit and color code | type A0/A1, color code CC05 |
| Isolation test | 707 V DC |
| Cable length | shielded maximum 1,000 m; 200 m for voltage measurement |
| Operating temperature | -30 to 60 °C horizontal / -30 to 50 °C vertical; below 0 °C from FS06 |
| Dimensions | 15 x 73 x 58 mm (W x H x D) |
| Weight | 32 g |
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which signal types does Siemens 6ES7134-6HB00-0CA1 process?
The module processes voltage and current signals; current measurement supports 2-wire or 4-wire transducers.
What resolution does the ET-200SP module provide?
Siemens documents a resolution of up to 16 bit including sign.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.