Siemens 6ES7341-1AH02-0AE0
€160.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
For mechanical planning, Siemens specifies a width of 45 mm, a height of 130 mm and a depth of 35 mm without the terminal module, plus a weight of approximately 140 g. Documented identifiers and values: 6ES7141-4BF00-0AB0; 200; 24 V; 24 V; 40; 20; 2.5 W; 45; 130; 35 mm; 140 g. The supply voltage is 24 V DC, and maximum current consumption is 40 mA from 1L+ and 20 mA from the 3.3-V backplane bus. Typical power dissipation is 2.5 W. A replacement or retrofit therefore requires comparison of the complete MLFB, terminal and connection module, wiring, diagnostic parameters and the existing ET-200-PRO station. The electronic module must match the ET-200-PRO base, connection solution and configured diagnostics so that sensor faults continue to be reported correctly. These functions help maintenance teams locate defective sensor cables or connection problems more quickly than with basic input modules that provide no channel diagnostics. The module is clearly identifiable for technical purchasing because Siemens specifies its channel count, voltage level, diagnostic scope, current consumption and mechanical dimensions. Siemens product data also states that a bus module is included and that the matching Connection Module IO must be ordered separately.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC ET 200 PRO and SIMATIC DP |
| Manufacturer/Order/Identification number | 6ES7141-4BF00-0AB0 |
| Equipment type | 8 DI 24 V DC High Feature electronic module |
| Inputs | 8 digital inputs |
| Input voltage | 24 V DC |
| Supply voltage | 24 V DC |
| Current consumption at 1L+ | max. 40 mA |
| Backplane bus current | 3.3 V DC max. 20 mA |
| Diagnostics | channel diagnostics, short-circuit and wire-break detection |
| Electrical isolation | Between backplane bus and remaining circuit sections |
| Power dissipation | typically 2.5 W |
| Dimensions | 45 x 130 x 35 mm without terminal module |
| Cooling method | passive module heat dissipation within the ET-200-PRO assembly |
| Weight | approx. 140 g |
Related products
Go to shop 
Siemens 6ES7317-6FF04-0AB0
€2,090.00
Siemens 6ES7157-0AA82-0XA0
Price on request
Siemens 6ES7422-1BH11-0AA0
€100.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7141-4BF00-0AB0?
The full manufacturer and type number 6ES7141-4BF00-0AB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.