Siemens 6ES7 414-3EM07-0AB0
Price on request
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
This memory division is important when comparing spare parts or planning a project migration, because smaller CPU-416 or CPU-414 variants can look similar while providing different performance and memory limits. The narrow S7-400-CPU housing is 50 mm wide, 290 mm high and 219 mm deep, with an approximate weight of 0.9 kg. Siemens specifies STEP 7 V5.4 SP5 or later, typical power loss of 6 W and backplane-bus data for 5 V DC and 24 V DC. Documented identifiers and values: 6ES7416-3ER05-0AB0; S7-400; 416-3; 11.2 MB; 5.6 MB; 5.6 MB; 12; V5.4; SP5; 6 W; 50; 290; 219 mm; 0.9 kg; 416-3; V5.4; SP5; 11.2 MB; 12. The first interface supports MPI/PROFIBUS DP at 12 Mbit/s, the second provides Ethernet/PROFINET, and an additional pluggable IFM interface is available. Siemens describes the module as a central processing unit with 11.2 MB of integrated working memory, split into 5.6 MB for code and 5.6 MB for data. The installed S7-400 project must retain the same memory and interface configuration. The documented value for Cooling method is Passive module heat dissipation in the S7-400 rack. The documented interfaces, memory allocation and backplane requirements support accurate procurement without moving the installed machine to a different control platform. The exact product designation remains the primary reference when comparing the component with existing equipment and project documentation.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-400 |
| Manufacturer/Order/Identification number | 6ES7416-3ER05-0AB0 |
| Equipment type | CPU 416-3 PN/DP central processing unit |
| Engineering | STEP 7 V5.4 SP5 or later |
| Working memory | 11.2 MB integrated |
| Memory allocation | 5.6 MB code and 5.6 MB data |
| Interface 1 | MPI/PROFIBUS DP, 12 Mbit/s |
| Interface 2 | Ethernet/PROFINET |
| Expansion interface | Pluggable IFM module |
| Backplane-bus current at 5 V | typ. 1.2 A, max. 1.4 A |
| Backplane-bus current at 24 V | max. 300 mA |
| Power loss | typ. 6 W |
| Dimensions | 50 x 290 x 219 mm |
| Cooling method | Passive module heat dissipation in the S7-400 rack |
| Weight | approx. 0.9 kg |
Related products
Go to shop 
Siemens 6ES7414-3EM06-0AB0
€2,030.00
Siemens 6ES7515-2UM01-0AB0
€2,430.00
Siemens 6ES7 416-3XL04-0AB0
€990.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7416-3ER05-0AB0?
The full manufacturer and type number 6ES7416-3ER05-0AB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.