Siemens 6ES7 414-3XJ00-0AB0
€250.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Documented identifiers and values: 6ES7414-3EM07-0AB0; V7.0; V5.5; 262; 2 MB; 64 MB; 50; 290; 219 mm; 6.5 W; 900 g. Siemens 6ES7 414-3EM07-0AB0 is a SIMATIC-S7-400-CPU for demanding machine and plant-control applications where existing S7-400 projects with PROFINET and PROFIBUS connectivity must remain in service. Siemens identifies the module as CPU 414-3 PN/DP with 4 MB of integrated working memory, divided into 2 MB for code and 2 MB for data. Similar CPU-414 variants can differ in firmware, memory capacity and interface equipment, making the complete order number essential for replacement. The documented 5-V backplane-bus data, additional 24-V-DP interface load and typical power loss of 6.5 W support rack verification. An additional IF-964-DP plug-in interface is also documented. The first interface is MPI/DP at 12 Mbit/s and the second is Ethernet/PROFINET. Siemens specifies firmware V7.0, engineering with STEP-7 from V5.5 plus HSP 262, isochronous mode over PROFIBUS DP or PROFINET, and Configuration in Run. The module is 50 mm wide, 290 mm high and 219 mm deep and weighs approximately 900 g. This combination supports S7-400 configurations that use classic DP communication together with Industrial Ethernet.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMATIC S7-400 |
| Manufacturer/order/identification number | 6ES7414-3EM07-0AB0 |
| Device type | CPU 414-3 PN/DP central processing unit |
| Firmware | V7.0 |
| Engineering | STEP 7 from V5.5 with HSP 262 |
| Working memory | 4 MB integrated |
| Memory split | 2 MB code and 2 MB data |
| Load memory | Memory Card, FEPROM/RAM up to 64 MB |
| Interface X1 | MPI/DP, 12 Mbit/s |
| Interface X5 | Ethernet/PROFINET |
| Expansion interface | IF 964-DP plug-in, IF1 |
| Isochronous operation | Isochronous mode over PROFIBUS DP or PROFINET |
| Backplane-bus current | 5 V DC, typ. 1.3 A, max. 1.6 A |
| Power loss | typ. 6.5 W |
| Dimensions | 50 x 290 x 219 mm |
| Cooling method | Passive module heat dissipation |
| Weight | approx. 900 g |
Related products
Go to shop 
Siemens 6ES7414-3EM06-0AB0
€2,030.00
Siemens 6ES7416-3ER05-0AB0
€1,600.00
Siemens 6AG1 414-3EM07-7AB0
Price on request
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
Which identifier is decisive for Siemens 6ES7 414-3EM07-0AB0?
The full manufacturer and type number 6ES7 414-3EM07-0AB0 is decisive for the order. Selection of the required version and verification for the customer’s installation remain the responsibility of the customer or its qualified personnel and should be based on the manufacturer documentation.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request availability
Use the form to request item-specific price, availability and estimated delivery information.