Siemens 6SE7041-8EK85-0AA0
€8,300.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6SE7041-3EK85-1AA0 is a rectifier/regenerative unit from the SIMOVERT MASTERDRIVES product range. The complete product number identifies the three-phase regenerative chassis unit with IP00 degree of protection and air cooling. Documented supply range is 3 AC 380 to 480 V at 50/60 Hz. For this power level, Siemens states 1333 A rated current and a 630 kW power rating. The DA-65 catalog lists the electrical and mechanical data together in the table row for the exact product number. It gives overall dimensions as 800 mm width, 1725 mm height and 565 mm depth. Complete shop dimensions are therefore 800 × 1725 × 565 mm (W × H × D). Device weight is marked in the Siemens catalog as an approximate value of 450 kg and is consequently shown as approx. 450 kg. This primary-source value replaces the previous approximation of 414 kg, which was supported only by an internal source. Product number, regenerative function, supply range, current class, power rating, chassis format and enclosure dimensions together form the assignment characteristics. Non-regenerative infeed units and parallel units in size K have different product numbers and a different device function or electronic equipment. All technical data refer exclusively to 6SE7041-3EK85-1AA0. Dimensions and weight apply to the individual chassis unit without an external cabinet, busbars, connection cables, additional options or shipping packaging. The greater height compared with the non-regenerative variant belongs to the documented format of this product number. The catalog explicitly lists the unit as a rectifier/regenerative unit in the 630-kW class.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SIMOVERT MASTERDRIVES |
| Manufacturer/order/identification number | 6SE7041-3EK85-1AA0 |
| Device type | Rectifier / regenerative unit |
| Device function | Regenerative supply unit |
| Number of phases | 3-phase |
| Mains connection | 3 AC 380–480 V |
| Mains frequency | 50/60 Hz |
| Rated current | 1333 A |
| Power rating | 630 kW |
| Degree of protection | IP00 |
| Design | Chassis unit |
| Cooling method | Air cooling |
| Dimensions | 800 × 1725 × 565 mm (W × H × D) |
| Weight | ca. 450 kg |
Related products
Go to shop 
Siemens 6SE7033-7EG80
€7,710.00
Siemens 6SE7133-7EG83-2NA0
€12,500.00
Siemens 6SE7032-6EG80
€8,320.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 6SE7041-3EK85-1AA0?
Complete overall dimensions are 800 × 1725 × 565 mm in W × H × D order. The Siemens catalog states an approximate device weight of 450 kg, so the shop lists approx. 450 kg.
Which current and power values are documented?
Documented data include 1333 A rated current and a 630 kW power rating for a supply range of 3 AC 380–480 V.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.