Siemens 6SL3040-1MA01-0AA0
€520.00
International delivery
The individual quotation states the shipping method and costs for the item and destination.
Product description
Siemens 6SL3053-0AA00-3AA0 is the Voltage Sensing Module VSM10 from the SINAMICS S120 product range. The complete product number identifies the older VSM10 version for three-phase line-voltage measurement. The module measures up to 690 V AC directly at the specified terminal or up to 100 V through an upstream transformer. The two voltage inputs must not be used simultaneously. Measured values are transferred to the associated Control Unit through 1 DRIVE-CLiQ interface. Electronics supply is 24 V DC and maximum current demand is 0.2 A. For additional measuring signals, 2 analog inputs are available. There is also 1 temperature-sensor input for KTY84-130 or PTC. Maximum conductor cross-section is 2.5 mm², and the PE connection is an M4 screw. The module uses natural convection. The Siemens catalog documents an input resistance above 362 kΩ per phase for X521 and above 2.5 MΩ per phase for X522. The analog inputs have approximately 100 kΩ internal resistance and 12 bit resolution. Power loss is below 5 W. For the exact product number, the catalog states 50 mm width, 150 mm height and 111 mm depth. Complete overall dimensions are 50 × 150 × 111 mm (W × H × D). These manufacturer values replace the previously listed differing dimensions of 50 × 178 × 102 mm. Weight is specified as approx. 0.9 kg. Dimensions and weight refer to the individual module without cables or shipping packaging.
The item supplied will have the stated manufacturer or type number and the stated condition category. Serial number, manufacturing date, labels, colour, packaging and normal signs of use or storage may differ. Specifications
Unless expressly confirmed, technical information is provided to identify the device type. The complete manufacturer or type number is decisive.
| Manufacturer | Siemens |
|---|---|
| Product series | SINAMICS S120 |
| Manufacturer/order/identification number | 6SL3053-0AA00-3AA0 |
| Module designation | VSM10 – Voltage Sensing Module |
| Supply voltage | 24 V DC |
| Maximum current consumption | 0.2 A |
| Direct voltage measurement | Up to 690 V AC |
| Voltage measurement via transformer | Up to 100 V |
| Analogue inputs | 2 |
| Temperature-sensor input | 1 (KTY84-130 / PTC) |
| DRIVE-CLiQ interfaces | 1 |
| Maximum conductor cross-section | 2.5 mm² |
| PE connection | M4 screw |
| Cooling method | Natural convection |
| Dimensions | 50 × 150 × 111 mm (W × H × D) |
| Weight | ca. 0.9 kg |
Related products
Go to shop 
Siemens 6SL3 040-0NC00-0AA0
€560.00
Siemens 6SL3120-1TE13-0AA0
€330.00
Siemens 6SL3120-1TE15-0AD0
€1,140.00
Urgent requirement?
Shipping options
Send us the complete type number, destination and requested timing. We will assess whether the specific item can be supplied and which shipping options can be offered.
Any stated dispatch or delivery date is an estimate unless expressly confirmed as binding.
Contact us now!Product safety
Manufacturer / EU responsible person
What are the dimensions and weight of Siemens 6SL3053-0AA00-3AA0?
The Siemens catalog states 50 × 150 × 111 mm (W × H × D) and a weight of approx. 0.9 kg.
Which voltages does the VSM10 measure?
Up to 690 V AC for direct measurement and up to 100 V through a transformer are documented. The two voltage inputs must not be used simultaneously.
What applies if an item develops a defect within 14 days?
For the condition categories “Used, removed from an installation” and “New, old stock”, the contractual 14-day right of return in the event of a defect applies. The defect must occur within 14 calendar days after delivery and be reported in text form within the same period.
In particular, the REHA tamper-evident seal must remain fully intact and our RMA approval is required before return. In an accepted case, we decide between replacement and refund. Details in Section 11 of the Terms.
Which shipping methods and delivery times are available?
The shipping method, shipping cost and estimated delivery time are confirmed for the specific order. Depending on the item, destination and urgency, we can check parcel, express or freight shipping as well as collection.
A delivery date is binding only if we expressly confirm it as binding.
Which payment terms apply?
The payment terms stated in the checkout or order confirmation apply. Depending on the order and customer, payment is made in advance or against invoice.
International deliveries and deliveries to new customers are generally made against advance payment unless we expressly confirm another payment arrangement.
Can I return an item ordered incorrectly or found incompatible?
No. There is no general B2B right of return, exchange, cancellation or withdrawal. Incorrect or duplicate orders and a lack of suitability or compatibility with the customer’s installation are not covered by the contractual 14-day right of return in the event of a defect. Details in Section 12 of the Terms.
Can I request individual pricing for several items?
You may request an individual quotation for several items or larger quantities. We then check availability and pricing for the specific requirement; there is no entitlement to a quantity discount. Open the quick enquiry.
Do you also purchase industrial spare parts?
Yes. You can offer us automation and drive components for purchase. Please provide complete type numbers, quantities, condition details and photographs where possible.
After review, we will tell you whether a purchase is possible and on which terms. Learn more about selling industrial stock.
Receive a quotation by email
Request price
Use the form to request item-specific price, availability and estimated delivery information.