Product description

As a 200-V version, the inverter can be operated on single- or three-phase networks with 200 to 240 V and 50/60 Hz. If its absorption capacity is not sufficient for the braking energy generated, an external braking resistor can be connected via DCP and R1. The inverter, together with a suitably selected 1FL6 motor, forms a coordinated servo system. The servo drive has an internal braking resistor; an external resistor can be connected through DCP/R1. Degree of protection IP20 and overload capability of 300 % are stated. Siemens specifies 24 V DC control supply with −15 to +20 % tolerance. The device belongs to the size FSB and measures 55 mm in width, 170 mm in height and 170 mm in depth. The manufacturer manual documents a width of 55 mm, a height of 170 mm and a depth of 170 mm. SIMOTICS S-1FL6 is documented as the associated motor family. The supply is documented as 1-/3-phase 200–240 V AC and line frequency is 50/60 Hz. Communication takes place via PROFINET on the interface X150; Siemens documents two physical Ethernet ports P1 and P2 for this purpose. The documented value for PROFINET interface is X150. Protection class IP20 requires installation in a suitable control cabinet environment. The product-specific weight of the individual basic device is conservatively stated as approx. 1.25 kg. Siemens 6SL3210-5FB10-1UF0 is a servo drive from the SINAMICS V90 PN product series. The order number determines the communication variant and performance level; interfaces of other V90 variants cannot be transferred without rescheduling. Product series, order number, power, current, supply, PROFINET, frame size, protection and mechanical data identify version 6SL3210-5FB10-1UF0. Complete overall dimensions are therefore 55 × 170 × 170 mm in the order width, height and depth. The exact Siemens table assigns the MLFB a rated power of 0.1 kW and a rated output current of 1.2 A. The exact Siemens selection table assigns 0.1 kW rated power and 1.2 A rated output current to this order number.